User`s guide

Setting Up the Projector 17

Connecting a Composite Video Source

1. If your video cable has an RCA connector, connect it to the

yellow video output connector on your player and the yellow

Video2 connector on the projector (as shown below). Or if you’re

using a coax video cable, connect it to the

Video1 connector on

the projector.

2. To play sound, you can connect an optional stereo mini-jack

audio cable and optional external speakers (see page 21).

3. When you’ve finished making any connections, see page 24 for

instructions on turning on the projector and Chapter 2 for

instructions on displaying and adjusting the image.

note

If the video cable was not

rovided with your video

device, you can purchase one

rom an electronics dealer.