User`s guide

Setting Up the Projector 19

Connecting a Component Video Source

You will need a special cable to connect your component video

equipment to the VGA-style connector on the projector. You can

order a component-to-VGA cable (part number ELPKC19) from

Epson; see page 10 for more information.

1. Locate a component-to-VGA cable.

2. Connect the cable to your player and the

Computer 1 or

Computer 2 connector on the projector.

3. You may need to change the

Input Signal setting in the

projector’s Signal menu to

Component (see page 51).

4. To play sound, you can connect an optional stereo mini-jack

audio cable and optional external speakers (see page 21).

5. When you’ve finished making any connections, see page 24 for

instructions on turning on the projector and Chapter 2 for

instructions on displaying and adjusting the image.

note

Be sure your video player is

not an RGB video source.

If you select the wrong

source, image quality may

suffer. Check your video

layer’s documentation.

Also, make sure the Input

Signal setting in the Signal

menu is set to

Auto or

Component Video (see

age 51).

Component-to-VGA cable