User`s guide

20 Setting Up the Projector
Connecting an RGB Video Source
1. Locate the VGA computer cable provided with the projector (or if
your video player has three connectors labeled R/G/B, locate a
component-to-VGA cable as shown on page 19).
2. Connect the cable to the video port(s) on your player and
the
Computer1 or Computer2 port on the projector.
3. You may need to change the
Input Signal setting in the
projector’s Signal menu to
RGB (see page 51).
4. To play sound, you can connect an optional stereo mini-jack
audio cable and optional external speakers (see page 21).
5. When you’ve finished making any connections, see page 24 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
note
Be sure your video player is
not a component video
source. If you select the
wrong source, image quality
may suffer. Check your
video player’s
documentation.