User`s guide

26 Setting Up the Projector
Shutting Down the Projector
This projector incorporates Instant Off technology. To turn it off, you
can press its Ppower button as described below, unplug it, or turn off
a power switch that supplies power to the projector. You don’t have to
wait for the projector to cool down first.
1. To turn off the projector, press the Ppower
button on the remote
control or projector.
You see a confirmation message.
(If you don’t want to turn it off,
press any other button.)
2. Press the Ppower button again. The projection lamp turns off
and the projector beeps twice. You can unplug the power cord.
If you want to turn the projector on again, make sure the orange
P power light is not flashing, then press the Ppower button.
note
Lamp life results depend
upon the Brightness Control
setting you’ve selected,
environmental conditions,
and usage.
Turn off this product when
not in use to prolong the life
of the projector.