User`s guide
65
5
Managing Projectors
The software included with your projector lets you monitor and
control your projectors from a remote computer.
First connect and configure each projector you want to monitor. You
can connect the projector over a wired network as described in this
chapter.
Once you’ve connected the projectors to the network, you can use any
of these tools to manage your projectors:
■ Use EMP Monitor (available for Windows
®
only) to see your
projectors’ status, switch image sources, turn projectors on and
off, control basic settings, and register projectors and projector
groups. See the EMP Monitor Operation Guide for more
information.
■ Use the mail notification function to receive e-mail alerts about
possible problems. See page 67 for more information.
This chapter covers the following information:
■ Connecting your projector to a wired network
■ Using e-mail alerts to warn you of problems
Connecting to a Wired Network
Follow these steps to connect the projector to your network and
configure it with an IP address:
1. Connect the projector to your network using a commercially
available 100BaseTX or 10BaseT network cable. Connect the
cable to the
LAN port on the projector. See page 23.
2. Turn on the projector.