User`s guide

66 Managing Projectors

3. Press the

Menu button on the remote control, select the

Network menu, then press Enter. You see the following screen:

4. Choose

Wired LAN and press Enter.

5. Do one of the following:

■ If your network assigns addresses automatically, turn on the

DHCP setting.

■ If your network does not assign addresses automatically, turn

off

DHCP and enter the projector’s IP Address, Subnet

Mask, and Gateway Address.

To enter numbers, use the pointer button on the remote

control to highlight the number you want to input, then press

Enter.

6. When you’re done making all necessary changes, select

Return,

Setup complete, and then Yes to confirm that you want to save

the changes. Press

Menu to exit.

note

If you’re a network

administrator, you can use

the SNMP option to enter a

trap IP address. This lets you

receive trap alerts for the

rojectors you’re monitoring.