User`s guide

98 Projector Installation
Installing the Lens
1. Turn off the projector and unplug the power cord.
2. Turn the focus ring clockwise until it stops moving.
3. Make sure the white dot on the lens is facing up. Insert the lens
straight into the projector, then turn clockwise until you hear it
click into place.
4. If necessary, attach the lens theft deterrent screw (see page 97).
caution
Only install or remove the
lens when necessary. If dust
enters the projector,
projection quality may
deteriorate and/or the
projector may malfunction.
Do not install or remove the
lens when the projector’s lens
insertion section is facing
up. Dust could enter the
projector.
Do not touch the lens with
your hand or fingers. If
fingerprints or oils are left
on the surface of the lens,
projection quality will
deteriorate.
White dot