Color Image Scanner Color Image Scanner Setup Guide Setup Guide Printed in Japan 00.XX-XX Setup Guide 4013305-00 XXX cover-F Rev.0 cover-F Rev.
L R4C3820 Rev. C A5 size 4/9/01 COVER.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee Where to Find Information Setup Guide (this document) Describes how to set up and use the scanner. Basic scanning operations are covered. It also explains how to install and configure the EPSON scanner software and the Automatic Document Feeder, and includes information on how to calibrate your system.
R R4C3820 Rev. C Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee A5 size 4/9/01 FRONT.FM Pass 0 ® Color Image Scanner All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. No patent liability is assumed with respect to the use of the information contained herein.
L R4C3820 Rev. C A5 size 4/9/01 FRONT.FM Pass 0 ii Proof Sign-off: KOW S.Koide C.Fujiwara J.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 UG.TOC Pass 0 Contents Safety Instructions Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Warnings, Cautions, and Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 ENERGY STAR Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 For United Kingdom Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety information . .
L R4C3820 Rev. C A5 size 4/9/01 UG.TOC Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee Chapter 3 Installing the Software System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . For Windows and SCSI users . . . . . . . . . . . . . . . . . . . . . . . . For Windows and IEEE 1394 users . . . . . . . . . . . . . . . . . . . . For scanning over a network . . . . . . . . . . . . . . . . . . . . . . . . . Installing EPSON TWAIN HS . . . . . . . . . . . . . .
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 UG.TOC Pass 0 Getting Information from Online Reference Guide . . . . . . . . . . . 4-31 Opening the Online Reference Guide . . . . . . . . . . . . . . . . . . 4-32 Installing the Online Reference Guide . . . . . . . . . . . . . . . . . 4-32 Chapter 5 Using the Start Button The Start Button Feature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 Setting up the Start Button Feature. . . . .
L R4C3820 Rev. C A5 size 4/9/01 UG.TOC Pass 0 vi Proof Sign-off: KOW S.Koide C.Fujiwara J.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 INTRO.FM Pass 0 Safety Instructions Important Safety Instructions Read all these instructions and save them for later reference. Follow all warnings and instructions marked on the scanner. ❏ Unplug the scanner before cleaning. Clean with a damp cloth only. Do not spill liquid on the scanner. ❏ Do not place the scanner on an unstable surface, or near a radiator or heat source.
L R4C3820 Rev. C A5 size 4/9/01 INTRO.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee ❏ Unplug the scanner and refer servicing to qualified service personnel under the following conditions: ❏ If the power cord or plug is damaged. ❏ If liquid has entered the scanner. ❏ If the scanner has been dropped or the case damaged. ❏ If the scanner does not operate normally or exhibits a distinct change in performance. (Do not adjust controls that are not covered by the operating instructions.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 INTRO.FM Pass 0 ENERGY STAR Compliance As an ENERGY STAR Partner, EPSON has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
L R4C3820 Rev. C A5 size 4/9/01 INTRO.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee As the colors of the wires in the mains lead of this appliance may not correspond with the colored markings identifying the terminals in your plug, proceed as follows: The green and yellow wire must be connected to the terminal in the plug which is marked with the letter E or with the earth symbol (G). The blue wire must be connected to the terminal in the plug marked with the letter N.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 KNOW.FM Pass 0 Chapter 1 1 Getting to Know Your Scanner Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 EPSON Scan Server and EPSON TWAIN HS Network . . . 1-3 Unpacking the Scanner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5 Scanner Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
L R4C3820 Rev. C A5 size 4/9/01 KNOW.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 KNOW.FM Pass 0 ❏ The Automatic Document Feeder (B81321✽) is available for continuous sheet scanning. Pages loaded in the Automatic Document Feeder are fed from the top and ejected face down. ❏ The optional IEEE 1394 Interface Board (B80834✽) enables you to vastly enhance your scanner’s connectivity.
L R4C3820 Rev. C A5 size 4/9/01 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee KNOW.FM Pass 0 The illustration below shows a sample network configuration in which networked scanning is available. One of the clients can be connected to the scanner server PC and import a scanned image from the scanner. After disconnecting, another client can access the scanner server PC.
R R4C3820 Rev. C Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee A5 size 4/9/01 KNOW.FM Pass 0 Unpacking the Scanner When you unpack your scanner, make sure the following parts are included and not damaged. If you find any missing or damaged items, contact your EPSON dealer immediately. (Your scanner also comes shipped with CD-ROMs (and/or floppy disks) which contain the driver software to run your scanner, along with other items necessary to use the scanner.
L R4C3820 Rev. C A5 size 4/9/01 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee KNOW.
R R4C3820 Rev. C Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee A5 size 4/9/01 KNOW.FM Pass 0 Lights and Buttons 1 The scanner has two indicator lights and two buttons. Lights Light Color Indicator Status Meaning Scanner is ready to scan. On READY Error. See your Online Reference Guide. Scanning operation is in progress. Green Flashing Scanner is being initialized. Error. See your Online Reference Guide. On ERROR Red Flashing This indicator also lights when an error occurs.
L R4C3820 Rev. C A5 size 4/9/01 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee KNOW.FM Pass 0 Buttons Button Function OPERATE Turns the scanner on and off. a Start The hardware switch to execute scanning and transfer scanned images to an assigned application in a stand-alone configuration of Windows Millennium Edition, 98, and 2000. To use this feature, see Chapter 5, “Using the Start Button,” for more details.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 SETUP.FM Pass 0 Chapter 2 Setting up the Scanner 2 Choosing a Place for the Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Releasing the Transportation Lock . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 Installing the Automatic Document Feeder . . . . . . . . . . . . . . . . . 2-5 Plugging in the Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
L R4C3820 Rev. C A5 size 4/9/01 SETUP.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee Choosing a Place for the Scanner Follow the guidelines below when selecting a location for your scanner: ❏ Place the scanner on a flat, stable surface. The scanner will not operate properly if it is tilted at an angle. ❏ Place the scanner close enough to the computer for the interface cable to reach it easily. ❏ Place the scanner near a wall outlet where the power cord can be easily unplugged.
R R4C3820 Rev. C Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee A5 size 4/9/01 SETUP.FM Pass 0 ❏ Allow space behind the scanner for the cables, and space above the scanner so that you can raise the Automatic Document Feeder fully. 2 596 mm 254 mm* 100 mm or more 488 mm 658 mm * When Automatic Document Feeder is closed. ❏ Keep the scanner away from high temperatures, humidity and excessive dirt or dust.
L R4C3820 Rev. C A5 size 4/9/01 SETUP.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee Releasing the Transportation Lock Before installing the Automatic Document Feeder and connecting the scanner to a power source, you must release the transportation lock. 1. Place the scanner on a flat, stable surface with its back side facing you. 2. While pushing the transportation lock button, turn it counterclockwise to the unlocked position, using a coin or similar disc as shown below.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 SETUP.FM Pass 0 Installing the Automatic Document Feeder The Automatic Document Feeder (B81321✽) allows you to automatically load multiple-page documents into your scanner. The document feeder is particularly useful for creating an image database. Before installing the Automatic Document Feeder, be aware that: ❏ The Automatic Document Feeder is heavy, so you may need to have someone help you lift it.
L R4C3820 Rev. C A5 size 4/9/01 SETUP.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee 3. Place the two knobs comes with the Automatic Document Feeder beside the scanner. 4. Align the installation screws with the holes of the Automatic Document Feeder. Slide the holes over the installation screws. w 2-6 Warning: The Automatic Document Feeder is heavy. Ask for assistance when lifting it.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 SETUP.FM Pass 0 5. Secure the knobs to the ends of the installation screws using the screwdriver. 2 6. Attach the Automatic Document Feeder’s connector to the scanner’s option interface.
L R4C3820 Rev. C A5 size 4/9/01 SETUP.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee 7. Close the Automatic Document Feeder. Note: After installing the ADF, be sure to carry the scanner as shown in the illustration below.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 SETUP.FM Pass 0 Plugging in the Scanner 1. Make sure that the scanner is turned off. The scanner is off when the OPERATE button is raised (not depressed). 2. If the power cord is not attached to the scanner, connect it to the AC socket on the back of the scanner, and plug the other end into a properly grounded wall outlet. c Caution: It is not possible to change the scanner's voltage.
L R4C3820 Rev. C A5 size 4/9/01 SETUP.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee Initializing the Scanner Before connecting the scanner to your PC, follow the steps below to make sure that the scanner is operating properly. 1. Open the Automatic Document Feeder so you can see the operation of the scanner during initialization. 2. Turn on the scanner by pressing the OPERATE button. carriage (in the home position) 3.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 SETUP.FM Pass 0 Connecting the Scanner to Your PC using the SCSI Interface For instructions on connecting the scanner to your PC using the SCSI interface, read this section. Unless your PC already has a SCSI board installed, you need to install one, along with SCSI driver software. Install the SCSI board according to the directions included with it.
L R4C3820 Rev. C A5 size 4/9/01 SETUP.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee Daisy Chain The SCSI interface allows you to connect up to seven devices (such as a scanner, hard drive, CD-ROM, and so on) to the computer, in what is called a “daisy chain” arrangement. Only the first SCSI device in a daisy chain is connected to the computer; each of the other devices is connected to another SCSI device.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 SETUP.FM Pass 0 Setting the SCSI ID number The scanner's default SCSI ID number is 2. 2 The SCSI ID rotary switch is located at the rear of the scanner. If you add the scanner to a system in which one of your SCSI devices already has a SCSI ID of 2, change the ID number to an unused number using the rotary switch. See the table below as a guide.
L R4C3820 Rev. C A5 size 4/9/01 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee SETUP.FM Pass 0 Setting the terminator switch The scanner has a built-in terminator, which allows SCSI devices to communicate properly with each other. You may need to change the terminator switch setting according to your computer system. Note: Do not use an external terminator. The terminator switch is located at the rear of the scanner.
R R4C3820 Rev. C Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee A5 size 4/9/01 SETUP.FM Pass 0 The scanner is in the middle of the daisy chain (other SCSI device) 2 terminator off Setting the select switch The scanner has two SCSI connectors: one is for a wide 68-pin SCSI cable and the other for a narrow 50-pin SCSI cable. You may need to change the select switch setting according to the SCSI cable you are using.
L R4C3820 Rev. C A5 size 4/9/01 SETUP.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee Connecting the scanner Use the following steps to connect the scanner to your PC or to another SCSI device. Note: The combination of connectors on the SCSI interface cable you need varies depending on the maker of your SCSI device and SCSI interface board. 1. Make sure the scanner, your PC, and all other SCSI devices are turned off and unplugged from the power source.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 SETUP.FM Pass 0 3. Connect the other end of the cable to the SCSI port of your PC or another SCSI device. 4. Plug in the power cords of your PC, the scanner, and other external SCSI devices. Note: Before turning on your system, be sure to read “Power-on sequence” on page 2-17. Power-on sequence Keep the following in mind every time you turn on your PC and SCSI devices, including the scanner.
L R4C3820 Rev. C A5 size 4/9/01 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee SETUP.FM Pass 0 Windows 98 Windows 2000 Windows Millennium Edition If you see one of these, follow the installation instructions in Chapter 3, then see “Power-off sequence” following.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 SETUP.FM Pass 0 Power-off sequence Keep the following in mind every time you turn off your PC and SCSI devices. ❏ When you are finished using your system, turn off your PC first, then the scanner and other SCSI devices. ❏ While using your PC, do not turn off any SCSI device which has a terminator that is active (on).
L R4C3820 Rev. C A5 size 4/9/01 SETUP.FM Pass 0 2-20 Setting up the Scanner Proof Sign-off: KOW S.Koide C.Fujiwara J.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 Chapter 3 Installing the Software System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 For Windows and SCSI users . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 For Windows and IEEE 1394 users . . . . . . . . . . . . . . . . . . . . 3-3 For scanning over a network . . . . . . . . . . . . . . . . . . . . . . . . .
L R4C3820 Rev. C A5 size 4/9/01 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee INSTALL.FM Pass 0 System Requirements Before installing the scanner software, make sure that your system meets the following requirements. For Windows and SCSI users Scanner: EPSON GT-30000 System: Microsoft® Windows® 95, Windows 98, Windows Millennium Edition, Windows 2000 Professional, or Windows NT® 4.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 INSTALL.
L R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 Operating System: Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee For EPSON Scan Server Microsoft Windows 95, Windows 98, Windows Millennium Edition, Windows 2000 Professional/Server, or Windows NT 4.0 Workstation/Server For EPSON TWAIN HS Network Microsoft Windows 95, Windows 98, Windows Millennium Edition, Windows 2000 Professional, or Windows NT 4.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 Installing EPSON TWAIN HS After connecting the scanner to your PC, install the scanner software (EPSON TWAIN HS) from the CD-ROM. The installation steps differ depending on the version of Windows. For Windows Millennium Edition users, see the instructions on this page. For Windows 2000 users, see “For Windows 2000 users” on page 3-8. For Windows 98 users, see “For Windows 98 users” on page 3-12.
L R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee 2. Turn on the scanner, then your PC. Note: It is important to follow this power-on sequence if you are using a SCSI interface. Otherwise the Plug and Play feature will not work. 3. When the dialog box shown below appears, select the Specify the location of the driver option, then click Next. 4. Insert your scanner software CD in the CD-ROM drive. 5.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 6. When the dialog box shown below appears, click Next. 3 7. The EPSON Screen Calibration utility automatically starts. Follow the instructions on the screen. For details, see “Calibrating Your Screen” on page 3-39. Note: If the EPSON Screen Calibration utility does not start automatically, see your Online Reference Guide to calibrate your screen after installing the scanner software. 8.
L R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee 9. This completes the EPSON TWAIN HS installation. Restart your PC. Note: It is important to restart your PC before using the scanner. You can now continue and install the other utility and applications from the scanner software CD. To install EPSON Scan Server and EPSON TWAIN HS Network, see “Software for Scanning over a Network” on page 3-22.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 4. Select the Search for a suitable driver for my device option, then click Next. 3 5. Make sure only the Specify a location check box is selected, and click Next.
L R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee 6. Browse and select, or type in the CD-ROM drive letter, the EPSON folder, the folder of your preferred language, and the Win2000 folder as the location, as shown below. Finally, click OK. 7. Follow the instructions on the screen. When the dialog box shown below appears, click Yes to continue.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 8. The EPSON Screen Calibration utility automatically starts. Follow the instructions on the screen. For details, see “Calibrating Your Screen” on page 3-39. Note: If the EPSON Screen Calibration utility does not start automatically, see your Online Reference Guide to calibrate your screen after installing the scanner software. 9. When the dialog box shown below appears, click Finish. 10.
L R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee For Windows 98 users 1. Connect your scanner to your PC. 2. Turn on the scanner, then your PC. Note: It is important to follow this power-on sequence if you are using a SCSI interface. Otherwise the Plug and Play feature will not work. 3. When a dialog box similar to the one shown below appears, insert the scanner software CD in the CD-ROM drive, then click Next.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 4. Select the Search for the best driver for your device option, then click Next. 3 5. Make sure only the Specify a location check box is selected, then browse and select, or type in the CD-ROM drive letter, the EPSON folder, the folder of your preferred language, and the Win98 folder as the location, as shown below. Finally, click Next.
L R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee 6. Follow the instructions on the screen. Depending on your system, you may be asked to insert the Windows 98 CD-ROM. Replace the scanner software CD with the Windows 98 CDROM. Make sure that the correct CD-ROM drive letter and the Win98 folder are specified in the Copy files from: box as shown below.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 8. When the following dialog box shown below appears, click Finish. 3 This completes the EPSON TWAIN HS installation. You can now continue and install the other utility and applications from the scanner software CD. To install EPSON Scan Server and EPSON TWAIN HS Network, see “Software for Scanning over a Network” on page 3-22.
L R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee Note: ❏ If you see README files in the application folders on the CD-ROM, be sure to read them as they contain up-to-date information on the applications. ❏ The Scanners and Cameras icon appears in Control Panel as shown below, after EPSON TWAIN HS is installed. For Windows 95 and NT 4.0 users 1. Make sure that the scanner is turned on. 2. Turn on the PC, and start Windows.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 ❏ If the following dialog box appears, insert the scanner software CD in the CD-ROM drive, then click Next. 3 When prompted for the drive and folder, select the CD-ROM drive, the EPSON folder, the folder of your preferred language, and the Win95 folder. An example is shown below.
L R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee When a dialog box similar to the one shown below appears, click Finish and go to step 3. ❏ If the following dialog box appears, insert the scanner software CD in the CD-ROM drive. Select Driver from disk provided by hardware manufacturer. Click OK then Browse.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 Select the CD-ROM drive, the EPSON folder, the folder of your preferred language, and the Win95 folder. Finally click OK and go to step 3. 3 3. Double-click the My Computer icon. 4. Double-click the CD-ROM drive icon. A dialog box asking for your preferred language appears. If no dialog box appears, double-click the Cdsetup.exe icon. 5. Select your preferred language and click OK. 6.
L R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee 7. From the list of applications, select those you want to install. Make sure EPSON TWAIN HS is selected for installation. 8. Click OK. Then follow the instructions on the screen. The setup program installs EPSON TWAIN HS. 9. After EPSON TWAIN HS is installed, the EPSON TWAIN HS dialog box appears. 10. Make sure that SCSI is selected and your EPSON scanner appears in the Scanner Selection list.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 11. Click Test to check the connection. If everything is properly installed and connected, Status: Device Ready appears under Scanner Information in the dialog box. 3 If the “Device Ready” message does not appear, see “Maintenance and Troubleshooting” in your Online Reference Guide. 12. Click OK to close the EPSON TWAIN HS dialog box. The EPSON Screen Calibration utility automatically starts.
L R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee Software for Scanning over a Network To use EPSON scanners in a networked environment and send scanned images to client PCs, you need to install the following software: ❏ EPSON Scan Server on the PC connected to the EPSON scanner you want to use ❏ EPSON TWAIN HS Network on network clients Note: To install the scanner software in Windows 2000 or NT 4.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 Note: If using Windows 95, the .inf file is installed. On Windows 98, Windows 2000, and Windows Millennium Edition, EPSON TWAIN HS is installed. 5. Start the Windows Explorer and double-click Cdsetup.exe in the CD-ROM drive. 3 6. Select the language that you want to use in the Select Language dialog box and click OK. The EPSON Software Setup dialog box appears. 7.
L R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee 8. Select EPSON Scan Server by checking to the left of the name in the EPSON Software Setup dialog box. Make sure to remove the check mark from application which is already installed on the scanner server PC. 9. Click OK to start the installation of selected applications. The Welcome dialog box appears. 10. Click Next to continue. The File Copy Progress bar appears.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 11. Click Yes or No. 3 12. Find your version of Windows below and follow the instructions. For Windows 98, 2000, and Millennium Edition users: The information dialog box appears. Click OK, then go to step 17 to finish the setup procedure.
L R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee For Windows 95 and NT 4.0 users: The EPSON Scan Server dialog box appears.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 Click Next, the EPSON Scan Server setup dialog box appears. 3 13. Select the scanner to be used from the Scanner Selection list box. Note: If the EPSON TWAIN HS software or device information file is not already installed on the scanner server PC using Windows 95, no available scanners will appear on the list at this point.
L R4C3820 Rev. C A5 size 4/9/01 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee INSTALL.FM Pass 0 14. Select the desired start up mode between Icon or Dialogbox. In the Taskbar icon start up mode, the EPSON Scan Server icon appears in the Taskbar tray when Scan Server starts as shown below. icon In the dialog box start up mode, the following dialog box appears when Scan Server starts.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 15. To test the status of the scanner, click Test. After the test is completed, information about the scanner status is displayed below the [Status] heading. 3 16. After setting this dialog box, click OK. The Setup Complete dialog box appears. 17. Click OK.
L R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee 18. Click Yes or No. Installation of EPSON Scan Server is complete. Windows 98, 2000, and Millennium Edition users can select the default scanner they want to use from Scanners and Cameras in Control Panel once they have installed EPSON Scan Server. See “Selecting Scanners” on page 3-41.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 Installing EPSON TWAIN HS Network Install and use EPSON TWAIN HS Network on a client PC that is connected to your network. Make sure you know the IP address or host name of the host PC on which you installed EPSON Scan Server as you will need it while installing EPSON TWAIN HS Network. 3 1. Insert the scanner software CD in the CD-ROM drive.
L R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee 3. When the following dialog box appears, click Add Software. 4. Click to select EPSON TWAIN HS Network. A check mark appears to indicate EPSON TWAIN HS Network is selected. You can also select additional applications to install. However, be sure to remove the check marks for applications already installed on your PC.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 5. Click OK, and then Next. 3 6. Click Next.
L R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee The following dialog box appears. Note: After the installation, you can still change the settings in the EPSON TWAIN HS Network dialog box. Click the Start button on the Windows taskbar and point to Settings, then select Control Panel. Finally, double-click the EPSON TWAIN HS Network icon.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 7. In the Network Scanner Address box, enter the IP address or Host name of the scanner server PC. Note: ❏ If you enter the IP address or Host name of the scanner server PC which connects a scanner other than GT-30000, the Scanner Status box displays a message indicating that this scanner is not supported.
L R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee 9. To test the status of the scanner, click Test. After the test is complete, check the scanner's status in the Scanner Status box. 10. After setting this dialog box, click OK. Screen calibration begins.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 11. Click Next. 3 12. The EPSON Screen Calibration utility automatically starts. Follow the instructions on the screen. For details, see “Calibrating Your Screen” on page 3-39. 13. Click OK. Installation of EPSON TWAIN HS Network is complete. You can now continue and install the ISIS driver from the scanner software CD. See the next section.
L R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee Installing Another Application Software The ISIS (Image and Scanner Interface Specification) driver is an industry standard interface for high performance document scanning. This section explains how to install the driver from the EPSON Scanner Software CD, as follows: 1. Insert the scanner software CD in the CD-ROM drive. 2. Click the Start button on the Windows task bar, and select Run. 3.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 3. When the EPSON Software Setup dialog box appears, click Add Software. 4. Click to select Adobe Acrobat Reader. A check mark appears to indicate Adobe Acrobat Reader is selected. Note: Some of the applications in the application list are selected by default.
L R4C3820 Rev. C A5 size 4/9/01 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee INSTALL.FM Pass 0 During the EPSON scanner software installation, the following dialog box appears. 1. Click Next. 2. In a dialog box similar to the one shown below, move the slider to the right or left until the two shades of the gray horizontal stripes match.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 Note: View the screen from a short distance. While the gray stripes do not blend perfectly well, try to adjust until the different tones match as closely as possible. 3. Click OK to register the calibration setting. 4. When the message Setup is complete appears, click OK. Screen calibration is not required any more until you change to a different monitor.
L R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee For Windows 98, 2000, and Millennium Edition users 1. Double-click the Scanners and Cameras icon in Control Panel. 2. Select a scanner you want to use, and then click Properties. 3. Click the Utility tab.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 4. Select the Select as default scanner for EPSON TWAIN HS option or the Select as default scanner for EPSON Scan Server option, and then click OK. Note: If you set up your scanner as a network scanner, select the Select as default scanner for EPSON Scan Server check box. 3 5. Click OK.
L R4C3820 Rev. C A5 size 4/9/01 INSTALL.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee For Windows 95 and NT 4.0 users 1. Double-click the EPSON TWAIN HS icon in Control Panel. The EPSON TWAIN HS dialog box appears. 2. Use the Scanner Selection list box to select a scanner you want to use. Then click OK.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 USING.FM Pass 0 Chapter 4 Using Your Scanner Scanning Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Loading documents into your Automatic Document Feeder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Placing a Document on the Scanner . . . . . . . . . . . . . . . . . . . . . . . . 4-4 4 Starting EPSON TWAIN HS . . . .
L R4C3820 Rev. C A5 size 4/9/01 USING.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee Scanning Procedure This chapter shows you how the scanner operates. The basic procedure for scanning is as follows: 1. Turn on the scanner and PC. (Keep in mind the “Power-on sequence” on page 2-17.) Make sure that the scanner’s READY light is on. 2. Place a stack of documents in the Automatic Document Feeder (See “Loading documents into your Automatic Document Feeder” on page 4-2.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 USING.FM Pass 0 1. Slide the right edge guide all the way to the right. 2. Insert the document stack face up into the Automatic Document Feeder until it meets resistance. Then move the right edge guide so it is flush with the right edge of your document. 4 Note: Make sure that there is no document on the document table.
L R4C3820 Rev. C A5 size 4/9/01 USING.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee Placing a Document on the Scanner Before scanning a document, remember to respect the rights of copyright owners. Do not scan published text or images without first checking the copyright status. 1. Open the Automatic Document Feeder. 2. Place the document on the document table, with the side to be scanned facing down. Make sure that the document is carefully aligned with the document guides.
R R4C3820 Rev. C Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee A5 size 4/9/01 USING.FM Pass 0 Note: The area with a width of 0.5 mm from both horizontal and vertical rulers is not scanned. 4 0.5mm 0.5mm 3. Close the Automatic Document Feeder gently so that the document does not move.
L R4C3820 Rev. C A5 size 4/9/01 USING.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee 4. Start your scanner software, and follow scanning instructions described later in this chapter or your Online Reference Guide. Note: ❏ Make sure the document is flat against the glass surface, otherwise the image will appear fuzzy and out of focus. Also be sure to close the Automatic Document Feeder to prevent interference from external light.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 USING.FM Pass 0 Starting EPSON TWAIN HS There are two ways to scan; with an application that supports TWAIN, or with the a Start button. If you .. ❏ use an application that supports EPSON TWAIN HS to scan, open your application (see “Starting EPSON TWAIN HS through your application software” below).
L R4C3820 Rev. C A5 size 4/9/01 USING.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee 1. Start the TWAIN-compliant application you want to use, such as Microsoft Imaging for Windows. 2. From the TWAIN-compliant application’s menu, select EPSON TWAIN HS as the TWAIN data source. Note: You usually need to perform this step only the first time you use the scanner with your application. Note for Windows Millennium Edition users: Do not select WIA-(scanner name) as the TWAIN data source.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 USING.FM Pass 0 3. In the dialog box of EPSON TWAIN HS, make sure that ADFSingle-sided or ADF-Double-sided is selected in the Document Source list. Also choose the appropriate settings for scanning. See “Scanning an Image” on page 4-15 in this guide or your Online Reference Guide for details on choosing EPSON TWAIN HS settings. 4. Click Scan.
L R4C3820 Rev. C A5 size 4/9/01 USING.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee Changing the Document Feed Speed When you scan using the Automatic Document Feeder, you can select the document feed speed between low and fast. Normally, you use the high speed mode. If you want to scan thick documents or reduce noise of an image, use the low speed mode. To change the document feed speed, lift the Automatic Document Feeder and locate a switch as shown below.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 USING.FM Pass 0 Fixing paper jams in the Automatic Document Feeder To remove jammed paper, follow the steps below. 1. Open the Automatic Document Feeder, then clear the paper on the document table and determine where the paper jam occurred. 4 2. Remove the jammed paper. If paper jams at the feeder position: Open the left cover and carefully pull the jammed paper out of the feeder mechanism.
L R4C3820 Rev. C A5 size 4/9/01 USING.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee Left Cover If paper jams at the paper eject position: Open the right cover and carefully pull the jammed paper out of the feeder mechanism.
R R4C3820 Rev. C Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee A5 size 4/9/01 USING.FM Pass 0 Note: Be careful not to pull too hard. If the paper tears, open the middle cover and remove the paper as shown below. Middle Cover 4 3. After removing the jammed paper, close the Automatic Document Feeder.
L R4C3820 Rev. C A5 size 4/9/01 USING.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee Document conditions Be sure to check the following before feeding a document: ❏ Ink on the document is dry. ❏ The document has no holes, is not ripped or curled, and has no articles attached to it. ❏ The document has no staples or other objects attached that might damage the feeder mechanism. ❏ The document has no folds closer than 5 mm to its edge.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 USING.FM Pass 0 Scanning an Image When you start EPSON TWAIN HS or EPSON TWAIN HS Network through a TWAIN-compliant application, the following window or similar appears on the screen: 4 The following gives an overview of EPSON TWAIN HS and EPSON TWAIN HS Network. Note: ❏ Some settings may appear dimmed and cannot be selected because of your choice of settings.
L R4C3820 Rev. C A5 size 4/9/01 USING.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee Document Source When using the document table of the scanner, leave the Document Source set to Flatbed. Other selections are available depending on what is installed. Select any of the following settings from the Document Source list: Flatbed: Select this setting when you use the scanner document table.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 USING.FM Pass 0 Image Type The Image Type list provides the following predefined settings. They can be combined with the optional pixel depth, scanning mode, de-screening, and auto exposure settings. Click the arrows on the right to view all of the available settings. Image Type list (predefined settings) 4 Note: The Auto Exposure feature is disabled when scanning without previewing.
L R4C3820 Rev. C A5 size 4/9/01 USING.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee 8-bit Gray De-screening: An Image Type setting which produces 8-bit grayscale images with 256 levels of gray. You can get images with the light part lighter and the dark part darker, with the moiré pattern removed. Use this setting to scan printed materials and display or print the images in grayscale. Black & White: An Image Type setting which produces black and white images without halftoning.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 USING.FM Pass 0 Previewing images To preview an image, click Preview in the EPSON TWAIN HS main window. 4 Preview button Note: You cannot preview an image which exceeds the available memory or disk space. If you try to preview a very large image, an alert appears on the screen.
L R4C3820 Rev. C A5 size 4/9/01 USING.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee The following window appears. You can see the effects of the following settings in the preview image.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 USING.FM Pass 0 ❏ Auto Exposure Note: Although the image in the Preview window changes as you make settings, the settings do not affect the actual image until you scan or rescan the image. Preview buttons Zoom Preview button 4 Clicking the Zoom Preview button enlarges the active marquee. See the next page for information about marquees.
L R4C3820 Rev. C A5 size 4/9/01 USING.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee Marquees A marquee is a frame around an entire image, or just a certain part of an image. Marquees are often used in scanning and imageediting software to select only the most important part of an image. Making and modifying marquees Move the pointer over the image in the Preview window, and the pointer becomes cross-hairs.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 USING.FM Pass 0 Resizing marquees When the pointer is placed on the edge of the active marquee, it changes to a double-headed arrow. You can resize the marquee by dragging the arrow. 4 If you drag an arrow while pressing the Shift key, the marquee is resized proportionally. Moving marquees When the pointer is placed within the active marquee, it changes to a hand icon.
L R4C3820 Rev. C A5 size 4/9/01 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee USING.FM Pass 0 Delete Marquee button Clicking the Delete Marquee button removes the active marquee. Note: You can also delete the active marquee by pressing the Delete key on your keyboard. Duplicate Marquee button Clicking the Duplicate Marquee button creates another marquee the same size as the active marquee. Use this button to make multiple marquees.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 USING.FM Pass 0 Scan button Clicking the Scan button scans the image or all of the marquees in the Preview window (one at a time). The scanned image is transferred to the application you used to open EPSON TWAIN HS so that you can work with the image from within that application. While scanning, you can see a progress indicator. If necessary, click the Cancel button to cancel the operation.
L R4C3820 Rev. C A5 size 4/9/01 USING.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee Saving the Scanned Image To save a scanned image in your application, choose Save or Save As from the File menu. For details, see your application documentation. Network Scanning Procedure You need to perform the following procedures to use your EPSON scanner in a networked environment and to send scanned images to a client PC. Details are described below. 1.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 USING.FM Pass 0 Windows will automatically launch EPSON Scan Server and display the EPSON Scan Server dialog box or its icon on the Windows taskbar (if you have included the software in the Start up folder of Windows). To manually start EPSON Scan Server, click Start and point to Programs, then EPSON Scan Server, and then select EPSON Scan Server. 4 Note: ❏ Make sure no other interface is used.
L R4C3820 Rev. C A5 size 4/9/01 USING.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee 3. Open EPSON TWAIN HS Network using a command such as Acquire. The exact procedure depends on the application. Refer to the documentation included with the application. The EPSON TWAIN HS Network dialog box appears. Network Scanning Network scanning requires that all of the devices (the EPSON scanner, the scanner server PC, and the client PC) are turned on.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 USING.FM Pass 0 Using the EPSON TWAIN HS Network dialog box on the client PC 1. Place a document on the document table, or a stack of documents in the Automatic Document Feeder. 2. Start EPSON TWAIN HS Network from the TWAIN-compliant application. 3. Choose the appropriate settings for your document in the EPSON TWAIN HS Network dialog box.
L R4C3820 Rev. C A5 size 4/9/01 USING.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee Scanning starts and the Progress bar indicates how much of the document has been scanned. Note: ❏ To cancel scanning, click Cancel on the Progress bar. ❏ Do not open the Automatic Document Feeder until scanning is completed. After the scanning is finished, the scanned image is displayed in the application. 5. Remember to remove the document(s) from the scanner.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 USING.FM Pass 0 Scanning starts and the Progress bar indicates how much of the document has been scanned. Note: ❏ To cancel scanning, click Cancel in the EPSON Scan Server dialog box on the scanner server PC. ❏ Clicking Stop in the EPSON Scan Server dialog box breaks the connection between the scanner server PC and the client PC, and exits EPSON TWAIN HS Network on the client PC.
L R4C3820 Rev. C A5 size 4/9/01 USING.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee Opening the Online Reference Guide 1. Insert the online guide CD in your CD-ROM drive. The following dialog box appears. If it does not appear, double-click the My Computer icon, and then click the CDROM icon. Finally, double-click GT30000.exe. 2. Click View Reference Guide to open the guide. Installing the Online Reference Guide 1. Insert the online guide CD in your CD-ROM drive. 2.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 SBUTTON.FM Pass 0 Chapter 5 Using the Start Button The Start Button Feature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 Setting up the Start Button Feature. . . . . . . . . . . . . . . . . . . . . . . . . 5-2 Assigning an application to the Start button . . . . . . . . . . . . 5-3 Disabling the Start button . . . . . . . . . . . . . . . . . . . . . . . . . . . .
L R4C3820 Rev. C A5 size 4/9/01 SBUTTON.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee The Start Button Feature The Start Button feature allows you to scan and send data to a target application with a single push of your scanner’s a Start button. This feature is supported by Windows 98, 2000, and Millennium Edition. The following sections help you set up a Windows 98, 2000, or Millennium Edition system to use the Start Button feature. Note for Windows 95 and NT 4.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 SBUTTON.FM Pass 0 Once EPSON TWAIN HS is installed on Windows 98, 2000, or Millennium Edition, the Scanners and Cameras icon appears in Control Panel, and your scanner is listed in the Scanners and Cameras Properties dialog box similar to the one shown below.
L R4C3820 Rev. C A5 size 4/9/01 SBUTTON.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee 3. On the Events menu, make sure the Start Button is selected in the Select an event list, and select the application you want to assign from the Start this program list. 4. Click OK to close the dialog box. For Windows 98 and 2000 users 1. Double-click the Scanners and Cameras icon in Control Panel. 2.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 SBUTTON.FM Pass 0 5. In the Send to this application list, select the check box of the application you want to assign, but clear all the other check boxes. Note: ❏ If multiple applications are selected, a dialog box appears to prompt you to select just one application from the list. ❏ Some applications do not support linkage to scanners and digital cameras.
L R4C3820 Rev. C A5 size 4/9/01 SBUTTON.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee Scanning by Pressing the Start Button You can open EPSON TWAIN HS, start scanning, and have the scanned image sent to a certain application, simply by pressing the a Start button on your scanner.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 OPTIONS.FM Pass 0 Chapter 6 Option Using the IEEE 1394 Interface Board . . . . . . . . . . . . . . . . . . . . . . . 6-2 Installing the IEEE 1394 interface board to your scanner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 Understanding IEEE 1394 connections . . . . . . . . . . . . . . . . . 6-4 Connecting to your PC . . . . . . . . . . . . . . . . . . . . . . . . . . . .
L R4C3820 Rev. C A5 size 4/9/01 OPTIONS.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee Using the IEEE 1394 Interface Board The optional IEEE 1394 interface board (B80834✽) offers highspeed data transfer and flexible connectivity for your scanner. It supports a peak data transfer rate of 400 Mbps. You can connect or disconnect the interface cables without having to turn off the scanner or your computer.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 OPTIONS.FM Pass 0 1. Turn off the scanner. Unplug any power cords, then disconnect all cables from the back panel of your scanner. 2. Use a cross-head screwdriver to remove the two screws securing the shield plate to the optional interface slot; then remove the plate. Be sure to keep both screws; you may need to use them again if you re-install the shield plate.
L R4C3820 Rev. C A5 size 4/9/01 OPTIONS.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee 4. Secure it with the retaining screws. 5. Reconnect all cables. Understanding IEEE 1394 connections The interface board is equipped with two cable connectors. One is used to connect the card to the computer, and the other is used to connect other IEEE 1394 devices in a daisy chain or tree configuration. Use the cable supplied when making the connection.
R R4C3820 Rev. C Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee A5 size 4/9/01 OPTIONS.FM Pass 0 Connecting to your PC Connect the scanner to your PC or other IEEE 1394 device as follows: 1. Connect one end of the cable to the IEEE 1394 port of the interface board on back of the scanner. 6 2. Connect the other end of the cable to the IEEE 1394 port on your PC, or other IEEE 1394 device.
L R4C3820 Rev. C A5 size 4/9/01 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee OPTIONS.FM Pass 0 When connecting the scanner to your PC with other IEEE 1394 devices If other IEEE 1394 devices are already connected to your PC, connect the scanner so that it is the last IEEE 1394 device in the chain. PC IEEE 1394 device Scanner Note: ❏ The IEEE 1394 cable supplied with the optional IEEE 1394 interface board has 2 six pin connectors at each end.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 GLOSS.FM Pass 0 Glossary additive primary colors The colors of red, green and blue (RGB) - which give the perception of white when fully added. These are the colors of the color system used with monitors and scanners. bi-level data Image data that is composed of 1 bit per pixel. A pixel is represented by a single bit of digital data that can express only 1 (light) or 0 (dark). bit Short for binary digit.
L R4C3820 Rev. C A5 size 4/9/01 GLOSS.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee Default Gateway (Address) The IP address of a special device used to route data from one part of a network using TCP/IP to another. See also IP address, TCP/IP, and Internet. DHCP Dynamic Host Configuration Protocol, A TCP/IP network protocol that enables hosts to obtain temporary IP addresses from one or more centrally administered servers.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 GLOSS.FM Pass 0 home position The position at the rear (nearest the cover hinge position) of the scanner where the carriage rests before a scanning operation. ICM Image Color Matching. Windows color management system designed to help you get WYSIWYG (what you see is what you get) color output.
L R4C3820 Rev. C A5 size 4/9/01 GLOSS.FM Pass 0 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee port An interface channel through which data is transmitted between devices. primary colors Basic colors. See additive primary colors and subtractive primary colors. resolution Indication of how finely an image is resolved into pixels. Measured in dots per inch (dpi), pixels per inch (ppi), or samples per inch (spi). scan An operation performed by the sensor and the carriage.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 GLOSS.FM Pass 0 threshold A reference point that is used to determine whether data will be processed as “on” or “off”. In the case of color image data, “on” means that a certain color will appear in a pixel or dot, and “off” means that color will not appear there.
L R4C3820 Rev. C A5 size 4/9/01 GLOSS.FM Pass 0 6 Glossary Proof Sign-off: KOW S.Koide C.Fujiwara J.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee R R4C3820 Rev. C A5 size 4/9/01 UG.IX Pass 0 Index Symbols B .
L R4C3820 Rev. C A5 size 4/9/01 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee UG.
Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee Installation software before, 3-2 Instructions safety, 1 Interface, 3-2, 3-3 board, IEEE 1394, 6-2 board, SCSI, 2-11, 2-16 IP address deleting, 3-35 entering, 3-35 J R R4C3820 Rev. C A5 size 4/9/01 UG.
L R4C3820 Rev. C A5 size 4/9/01 Proof Sign-off: KOW S.Koide C.Fujiwara J.Miyakoshi NOC Lee UG.
EPSON OVERSEAS MARKETING LOCATIONS EPSON AMERICA, INC. EPSON UK LTD. 20770 Madrona Ave. Campus 100, Maylands Avenue, P.O. Box 2842 Hemel Hempstead, Herts, Torrance, CA 90509-2842 HP2 7TJ, U.K. Phone: (800) 922-8911 Phone: (+44) 01442 261144 Fax: (310) 782-5220 Fax: (+44) 01442 227227 EPSON DEUTSCHLAND GmbH EPSON FRANCE S.A. Zülpicher Straße 6, 68 bis, rue Marjolin 40549 Düsseldorf Germany 92300, Levallois-Perret, France Phone: (0211) 56030 Phone: 33.1.40.87.37.
Color Image Scanner Color Image Scanner Setup Guide Setup Guide Printed in Japan 00.XX-XX Setup Guide 4013305-00 XXX cover-F Rev.0 cover-F Rev.
