User`s guide

Installing the EZ-SCSI Software
If you are running Windows NT, you do not need to install
EZ-SCSI or the EPSON Scanning Utilities; skip to “Installing
Adobe Photoshop.”
Follow these steps to install the
Adaptec EZ-SCSI software:
1. Start Windows.
2. Insert the Adaptec EZ-SCSI Disk 1 in a diskette drive.
3. From the Program Manager, open the File menu and choose
Run. The Run dialog box appears.
4. Type A: SETUP (or B: SETUP if you used drive B) in the
Command Line box and choose OK.
5. Choose Install Adaptec EZ-SCSI. A screen appears
identifying your SCSI interface card. Choose Continue
6. The next screen identifies the scanner as the GT-8500; this is
normal. Choose Continue.
7. The Installation Subdirectory screen appears, prompting you
for a directory for the EZ-SCSI program files. Choose Install
to accept the default directory. The program copies the files.
8. Follow the instructions that appear on the screen to accept
the EZ-SCSI default settings and insert each EZ-SCSI
diskette.
The program modifies the
CONFIG.SYS file and saves a
backup copy of the original as CONFIG.BAK. It also creates
an Adaptec SCSI program group and its icons in Windows.
9. When the Installation Complete dialog box appears, choose
Reboot System to restart the computer.