User`s guide

System and Memory Requirements
For the scanner hardware and software to work properly, your
system must include the following minimum configuration:
A
386-based (or higher) IBM@ compatible computer or an
IBM PSI 2@
MS-DOS@version 5.0 or higher
Microsoft Windows 3.1 or higher, or Windows NT
3.5-inch, high-density diskette drive
At least 1OOMB of hard disk space for scanner applications
and images
4MB of system RAM plus a permanent Windows swap file
providing 8MB to 16MB of virtual memory (a swap file of
contiguous space on your hard disk drive which Windows
can use; see your Microsoft Windows manual)
Note:
4A4B is the minimum amount ofRAM; graphics qplications run
farter andmore efjciently with moreRAM.
A mouse or other compatible pointing device
A Video Graphics Array (VGA) or other Windows
compatible display adapter card or built-in interface
supporting at least
16 colors for simple color scanning. To
adequately view an average-complexity color scan, the card
or interface must support
256 colors, while high-quality,
realistic color scans require a card supporting 16 million
colors.
A color monitor compatible with the card or interface you
are using.