Operation Manual

4. Place the holder on the document table, align it with the
notch on the transparency guide, as shown below.
Loading normal documents with the Unit installed
To scan normal documents with the Transparency Unit
installed, always insert the reflective document mat included
with this unit as described below.
1. Open the Transparency Unit and remove the transparency
guide from the scanner’s document table if necessary.
2. Slide the mat into place and insert the tabs into the slots on
the Transparency Unit.
f-021
04-38
R
Ginger Rev.C
A5 size Chapter 3
97/07/23 Pass 3, DR
Options
3-13