Operation Manual

3. Place your document on the document table and close the
Transparency Unit.
To remove the reflective document mat, slide it up and out of
the slots on the Transparency Unit.
Placing transparencies and oversized film
To place transparencies or film that is larger than the guides on
the document table, put the transparency or film directly on the
document table and align it with the notch on the transparency
guide, as shown below. The maximum film size is
290 × 420 mm.
If the reflective document mat is installed in the Transparency
Unit, remove it. Then, close the Transparency Unit.
04-39
f-022
L
Ginger Rev.C
A5 size Chapter 3
97/07/23 Pass 3, DR
3-14
Options