Operation Manual

Note:
Make sure the unit is completely closed; otherwise, an option error
results and you cannot scan the document.
If a color stripe appears when scanning film
The optical phenomenon where color stripes appear is called
Newton’s ring. This occurs when two, very thin membrances
such as film surfaces or soap bubble surfaces meet.
If this phenomenon occurs, try scanning the film upside down.
This may elminate the effect of Newton’s ring.
Adjusting the angle of the transparency guide
If you find that your scanned image’s edges are being scanned
at a slight angle, adjust the angle of scanning by turning the
adjust pin. Most scanners scan at an angle due to the
movement of the carriage. The direction and degree you
should turn the adjust pin depends on your individual scanner
and the placement of the document to be scanned. You may
want to experiment with this feature to determine the best
angle. If you are still unsatisfied after experimenting with the
adjust pin, see “Using the Document Guide” on page 2-8 for
information on how to precisely find the angle you need.
+0.2
+0.1
-0.1
-0.2
0
f-002b
R
Ginger Rev.C
A5 size Chapter 3
97/07/23 Pass 3, DR
Options
3-15