Operation Manual

Colors on your monitor are different from those in the original

image.

Check the image settings in your scanner software, especially

data format (bits/pixel/color), gamma correction, and color

correction. Try a different combination of these settings.

Check the color matching and color management capabilities

of your computer, display adapter, and software. Some

computers can change the color palette to adjust colors on

your screen. (See your software and computer manuals.)

Exact matching of colors is very difficult. The reason for this is

explained in your Color Guide. Check your software and

monitor manuals for information on color matching and

calibration.

Printed colors are different from those in the original image.

Exact reproduction of colors is very difficult. The reason for

this is explained in your Color Guide. See your software manual

or your printer documentation for guidance on color matching.

The printed image is larger or smaller than the original size.

Change the image size settings in your software to resize the

printed image. Do not use the size of the image on your

monitor to judge the printed size.

The image cannot be printed, the printout is garbled, or the

printout is not an image.

Check that the printer is properly connected with the computer

and is correctly set up. (See your printer manual.)

Ginger Rev.C

A5 size Chapter 4

97/07/24 Pass 0, DR

4-8

Troubleshooting and Maintenance