User Guide

73
Note: You cannot use Picture in Picture while projecting 3D images or when Image Processing is set to
Fast in the Signal menu.
1. Turn on the projector and switch to the HDMI image source you want to use.
2. Press the P-in-P button on the remote control.
The second HDMI video source appears as a sub-screen in the corner of the image.
Note: Press the Menu button on the remote control to adjust picture-in-picture options.
3. To swap the main screen and sub-screen video sources, press and hold the P-in-P button for at
least three seconds.
4. Press the P-in-P button again to exit.
Available Picture in Picture Options
Parent topic: Adjusting Projector Features
Available Picture in Picture Options
You can adjust the following options by pressing the Menu button on the remote control while using
Picture in Picture:
Setting Description
Subscreen Size Adjusts the size of the sub-screen
Subscreen Position Adjusts the location of the sub-screen
Swap Main/Sub Switches the video source displayed on the main screen with the
source displayed on the sub-screen
Exit Picture in Picture Exits picture-in-picture mode