User's Guide NPD5255-00 EN
User's Guide Copyright Copyright No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information herein.
User's Guide Trademarks Trademarks ❏ EPSON is a registered trademark, and EPSON EXCEED YOUR VISION or EXCEED YOUR VISION is a trademark of Seiko Epson Corporation. ® ❏ EPSON Scan software is based in part on the work of the Independent JPEG Group. ❏ libtiff Copyright © 1988-1997 Sam Leffler Copyright © 1991-1997 Silicon Graphics, Inc.
User's Guide Contents Contents Copyright Placing Originals Trademarks Available Originals for the ADF. . . . . . . . . . . . . . . 31 Placing Originals on the ADF. . . . . . . . . . . . . . . . . 31 Placing Originals on the Scanner Glass. . . . . . . . . . 32 About This Manual Printing Introduction to the Manuals. . . . . . . . . . . . . . . . . . . 7 Marks and Symbols. . . . . . . . . . . . . . . . . . . . . . . . . 7 Descriptions Used in this Manual. . . . . . . . . . . . . . .
User's Guide Contents Registering Contacts. . . . . . . . . . . . . . . . . . . . . 70 Registering Grouped Contacts. . . . . . . . . . . . . . 70 Registration and Backup of Contacts Using a Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Sending Faxes. . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Basic Fax Sending Operations. . . . . . . . . . . . . . .71 Various Ways of Sending Faxes. . . . . . . . . . . . . . 72 Receiving Faxes. . . . . . . . . . . . . . . . . . . . . . .
User's Guide Contents Printout Problems. . . . . . . . . . . . . . . . . . . . . . . . 114 Print Quality is Poor. . . . . . . . . . . . . . . . . . . . .114 Print Quality Does Not Improve Even After Aligning the Print Head. . . . . . . . . . . . . . . . . . 115 Images or Photos are Printed in Unexpected Colors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 Banding Appears at Intervals of Approximately 3.3 cm. . . . . . . . . . . . . . . . . . . .115 Copy Quality Is Poor. . . . . . . . . .
User's Guide About This Manual About This Manual Introduction to the Manuals The following manuals are supplied with your Epson printer. As well as the manuals, see the help included in the various Epson software applications. ❏ Start Here (paper manual) Provides you with information on setting up the printer, installing the software, using the printer, solving problems, and so on. ❏ User's Guide (digital manual) This manual.
User's Guide About This Manual Descriptions Used in this Manual ❏ Screenshots of the printer driver and the EPSON Scan (scanner driver) screens are from Windows 8.1 or Mac OS X v10.10.x. The content displayed on the screens varies depending on the model and situation. ❏ Illustrations of the printer used in this manual are examples only. Although there may be slight differences depending on the model, the method of operation is the same.
User's Guide Important Instructions Important Instructions Safety Instructions Read and follow these instructions to ensure safe use of this printer. Make sure you keep this manual for future reference. Also, be sure to follow all warnings and instructions marked on the printer. ❏ Use only the power cord supplied with the printer and do not use the cord with any other equipment.
User's Guide Important Instructions Advisories and Warnings for Setting Up the Printer ❏ Do not block or cover the vents and openings in the printer. ❏ Use only the type of power source indicated on the printer's label. ❏ Avoid using outlets on the same circuit as photocopiers or air control systems that regularly switch on and off. ❏ Avoid electrical outlets controlled by wall switches or automatic timers.
User's Guide Important Instructions Advisories and Warnings for Transporting or Storing the Printer ❏ When storing or transporting the printer, avoid tilting it, placing it vertically, or turning it upside down; otherwise ink may leak. ❏ Before transporting the printer, make sure that the print head is in the home (far right) position.
User's Guide Printer Basics Printer Basics Part Names and Functions A ADF (Automatic Document Feeder) cover Open when removing jammed originals in the ADF. B ADF input tray Feeds originals automatically. C ADF edge guide Feeds originals straight into the printer. Slide to the edges of the originals. D ADF output tray Holds originals ejected from the ADF. E Paper cassette Loads paper. A Print head (under this section) Fires ink. B Output tray Holds the ejected paper.
User's Guide Printer Basics C Edge guide Feeds the paper straight into the printer. Slide to the edges of the paper. D Paper cassette Loads paper. A Document cover Blocks external light while scanning. B Scanner glass Place the originals. C Control panel Operates the printer. A Scanner unit Scans placed originals. Open when removing jammed paper inside the printer. B Ink tank unit Contains the ink tanks.
User's Guide Printer Basics C Ink reservoir tanks (Ink tanks) Supplies ink to the print head. A Rear cover Remove when removing jammed paper. B LAN port Connects a LAN cable. C USB port Connects a USB cable. D AC inlet Connects the power cord. E LINE port Connects a phone line. F EXT. port Connects external phone devices. Control Panel Buttons and Lights A Turns the printer on or off. Unplug the power cord when the power light is off. B Displays the home screen.
User's Guide Printer Basics D Stops the current operation. E - F l, u, r, d, OK G H Displays menus and messages. Press l, u, r, and d to select menus. Press OK to confirm your selection or run the selected feature. Returns to the previous screen. 0-9 Enters numbers, characters, and symbols. , I Opens the contacts list. J Starts printing, copying, scanning, and faxing in black and white. K Starts printing, copying, scanning, and faxing in color.
User's Guide Printer Basics The displayed screen varies depending on the setting items. The following is the screen for entering the password for your Wi-Fi network. Icons Descriptions ud Switches the character type. An icon that shows the current character type is displayed at the top-right of the LCD screen. A: Enters uppercase letters. a: Enters lowercase letters. 1: Enters numbers and symbols. l Deletes a character to the left (backspace). OK Confirms the entered characters.
User's Guide Printer Basics Menu Settings and Explanations Layout With Border Copies with a border around the edges. 2-up Copies multiple page originals onto one sheet. When placing originals in the ADF, insert them into the feeder from the top or left edge. Load vertical originals as shown below, and select Portrait from Document Orientation. Load horizontal originals as shown below, and select Landscape from Document Orientation.
User's Guide Printer Basics Menu Settings and Explanations Settings Format Select the format in which to save the scanned image. Scan Area Select the scan area. Auto Cropping: Crops the white space around the text or image when scanning. Max Area: Scans at the maximum scan area of the scanner glass or the ADF. Document Type Select the type of your original. Density Select the contrast of the scanned image. Document Orientation Select the orientation of your original.
User's Guide Printer Basics Menu Settings and Explanations Fax Report Fax Settings List Prints the current fax settings. Fax Log Displays or prints a history of sent and received fax jobs. You can set to print this report automatically using the following menu. Setup > Fax Settings > Output Settings > Fax Log Auto Print Last Transmission Prints a report for the previous fax that was sent or received through polling.
User's Guide Printer Basics Menu Settings and Explanations Printer Settings Paper Source Settings Auto Error Solver A4/Letter Switching Enable this feature so that error messages are not displayed even when the paper size setting for the print job and the paper loaded in the paper source do not match. This feature is only available when the paper size is set to A4 or Letter.
User's Guide Printer Basics Menu Settings and Explanations Network Settings Network Status Displays or prints the network settings and connection status. Wi-Fi Setup Wi-Fi Setup Wizard See the Network Guide for more details. Push Button Setup (WPS) PIN Code Setup (WPS) Wi-Fi Auto Connect Disable Wi-Fi You may be able to resolve network problems by disabling the Wi-Fi settings or making the Wi-Fi settings again. See the Network Guide for more details.
User's Guide Printer Basics Menu Settings and Explanations Eco Mode The following Eco mode settings are available. When these settings are disabled, the settings made in Common Settings are applied. Sleep Timer Select the time period before the printer enters sleep mode (energy saving mode) when no operations are performed. The LCD screen turns black when the set time passes. 2-Sided (Copy) Restore Default Settings Sets 2-sided copying as the default setting.
User's Guide Printer Basics Menu Settings and Explanations Output Settings Fax Output Saves received documents on a computer. You need to make settings on FAX Utility on a computer. Auto Reduction Reduces large received documents to fit on the paper in the paper source. Reducing may not always be possible depending on the received data. If this is turned off, large documents are printed at their original size on multiple sheets, or a blank second page may be ejected.
User's Guide Printer Basics Menu Settings and Explanations Basic Settings Fax Speed Select the fax transmission speed. We recommend selecting Slow(9,600bps) when a communication error occurs frequently, when sending/receiving a fax to/from abroad, or when you are using an IP (VoIP) phone service. ECM Automatically corrects errors in the fax transmission (Error Correction Mode), mostly caused by telephone line noise. If this is disabled, you cannot send or receive documents in color.
User's Guide Loading Paper Loading Paper Paper Handling Precautions ❏ Read the instruction sheets supplied with the paper. ❏ Fan and align the edges of the paper before loading. Do not fan or curl photo paper. Doing so may damage the printable side. ❏ If the paper is curled, flatten it or curl it slightly in the opposite direction before loading. Printing on curled paper may cause paper jams and smears on the printout.
User's Guide Loading Paper Available Paper and Capacities Epson recommends using genuine Epson paper to ensure high-quality printouts. Genuine Epson Paper Media Name Size Loading Capacity (Sheets) 2-Sided Printing Epson Bright White Ink Jet Paper A4 120 Auto, Manual*1 Epson Premium Glossy Photo Paper*2 A4, 13×18 cm (5×7 in.), 16:9 wide size (102×181 mm), 10×15 cm (4×6 in.
User's Guide Loading Paper Related Information & “Technical Support Web Site” on page 138 List of Paper Types To obtain optimum printing results, select the paper type that suits the paper. Media Name * Media Type Control Panel Printer Driver, Smart device* Epson Bright White Ink Jet Paper plain papers plain papers Epson Premium Glossy Photo Paper Prem.
User's Guide Loading Paper Note: When using paper larger than A4 size, extend the paper cassette. 3. Slide the front edge guide to the paper size you want to use. 4. With the printable side facing down, load paper against the front edge guide. c Important: ❏ Make sure the paper does not extend beyond the triangle symbol at the end of the paper cassette. ❏ Do not load more than the maximum number of sheets specified for the paper.
User's Guide Loading Paper ❏ Envelopes ❏ Pre-punched paper Note: You can use pre-punched paper under the following conditions. Automatic 2-sided printing is not available for prepunched paper. ❏ Loading capacity: One sheet ❏ Available size: A4, B5, A5, A6, Letter, Legal ❏ Binding holes: Do not load paper with the binding holes at the top or the bottom. Adjust the print position of your file to avoid printing over the holes. 5. Slide the side edge guides to the edges of the paper. 6.
User's Guide Loading Paper 8. Slide out the output tray.
User's Guide Placing Originals Placing Originals Place originals on the scanner glass or the ADF. Use the scanner glass for originals that the ADF does not support. You can scan multiple originals at the same time with the ADF.
User's Guide Placing Originals 3. Place the originals face up in the ADF. c Important: ❏ Do not load originals above the line just under the d symbol inside the ADF edge guide. ❏ Do not add originals while scanning. 4. Slide the ADF edge guide to the edge of the originals. Related Information & “Available Originals for the ADF” on page 31 Placing Originals on the Scanner Glass ! Caution: Be careful not to trap your fingers when closing the document cover. Otherwise you may be injured.
User's Guide Placing Originals 1. Open the document cover. 2. Remove any dust or stains on the scanner glass. 3. Place the original face-down and slide it to the corner mark. Note: ❏ A range of 1.5 mm from the edges of the scanner glass is not scanned. ❏ When originals are placed in the ADF and on the scanner glass, priority is given to the originals in the ADF. 4. Close the cover gently. Note: Remove the originals after scanning or copying.
User's Guide Printing Printing Printing from a Computer Printing Basics - Windows Note: ❏ See the online help for explanations of the setting items. Right-click an item, and then click Help. ❏ Operations may differ depending on the application. See the application's help for details. 1. Load paper in the printer. c Important: Make the paper settings on the control panel. 2. Open the file you want to print. 3. Select Print or Print Setup from the File menu. 4. Select your printer.
User's Guide Printing 5. Select Preferences or Properties to access the printer driver window. 6. Make the following settings. ❏ Document Size: Select the paper size you loaded in the printer. ❏ Orientation: Select the orientation you set in the application. ❏ Paper Type: Select the type of paper you loaded. ❏ Color: Select Grayscale when you want to print in black or shades of gray.
User's Guide Printing Printing Basics - Mac OS X Note: ❏ Explanations in the section use TextEdit as an example. Operations and screens differ depending on the application. See the application's help for details. ❏ When printing envelopes, use the application to rotate the data 180 degrees. See the application's help for details. 1. Load paper in the printer. c Important: Make the paper settings on the control panel. 2. Open the file you want to print. 3.
User's Guide Printing 5. Select Print Settings from the pop-up menu. Note: On Mac OS X v10.8.x or later, if the Print Settings menu is not displayed, the Epson printer driver has not been installed correctly. menu > Printers & Scanners (or Print & Scan, Print & Fax), remove the Select System Preferences from the printer, and then add the printer again. See the following to add a printer. http://epson.sn 6. Make the following settings. ❏ Media Type: Select the type of paper you loaded.
User's Guide Printing ❏ Manual 2-sided printing (for Windows only) When the printer has finished printing the first side, flip the paper over to print on the other side. You can also print a booklet that can be created by folding the printout. (For Windows only) Note: ❏ If you do not use paper that is suitable for 2-sided printing, the print quality may decline and paper jams may occur. ❏ Depending on the paper and the data, ink may bleed through to the other side of the paper.
User's Guide Printing Note: ❏ Printing may be slow depending on the combination of options selected for Select Document Type in the Print Density Adjustment window and for Quality on the Main tab. ❏ For manual 2-sided printing, the Print Density Adjustment setting is not available. 7. Set the other items on the Main and More Options tabs as necessary, and then click OK. 8. Click Print. For manual 2-sided printing, when the first side has finished printing, a pop-up window is displayed on the computer.
User's Guide Printing Printing Several Pages on One Sheet You can print two or four pages of data on a single sheet of paper. Printing Several Pages on One Sheet - Windows 1. Load paper in the printer. 2. Open the file you want to print. 3. Access the printer driver window. 4. Select 2-Up or 4-Up as the Multi-Page setting on the Main tab. 5. Click Page Order, make the appropriate settings, and then click OK to close the window. 6.
User's Guide Printing 6. Set the other items as necessary. 7. Click Print. Related Information & “Loading Paper in the Paper Cassette” on page 27 & “Printing Basics - Mac OS X” on page 36 Printing to Fit the Paper Size You can print to fit the paper size you loaded in the printer. Printing to Fit the Paper Size - Windows 1. Load paper in the printer. 2. Open the file you want to print. 3. Access the printer driver window. 4. Make the following settings on the More Options tab.
User's Guide Printing Printing to Fit the Paper Size - Mac OS X 1. Load paper in the printer. 2. Open the file you want to print. 3. Access the print dialog. 4. Select the size of the paper you set in the application as the Paper Size setting. 5. Select Paper Handling from the pop-up menu. 6. Select Scale to fit paper size. 7. Select the paper size you loaded in the printer as the Destination Paper Size setting. 8. Set the other items as necessary. 9. Click Print.
User's Guide Printing 6. Click Print. The Job Arranger Lite window is displayed and the print job is added to the Print Project. 7. With the Job Arranger Lite window opened, open the file that you want to combine with the current file, and then repeat steps 3 to 6. Note: If you close the Job Arranger Lite window, the unsaved Print Project is deleted. To print later, select Save from the File menu. 8. Select the Layout and Edit menus in Job Arranger Lite to edit the Print Project as necessary. 9.
User's Guide Printing Making Posters Using Overlapping Alignment Marks Here is an example of how to make a poster when 2x2 Poster is selected, and Overlapping Alignment Marks is selected in Print Cutting Guides. 1. Prepare Sheet 1 and Sheet 2. Cut off the margins of Sheet 1 along the vertical blue line through the center of the top and bottom cross marks.
User's Guide Printing 2. Place the edge of Sheet 1 on top of Sheet 2 and align the cross marks, then temporarily tape the two sheets together from the back. 3. Cut the taped sheets in two along the vertical red line through the alignment markers (this time, the line to the left of the cross marks).
User's Guide Printing 4. Tape the sheets together from the back. 5. Repeat steps 1 to 4 to tape Sheet 3 and Sheet 4 together. 6. Cut off the margins of Sheet 1 and Sheet 2 along the horizontal blue line through the center of the left and right side cross marks.
User's Guide Printing 7. Place the edge of Sheet 1 and Sheet 2 on top of Sheet 3 and Sheet 4 and align the cross marks, and then temporarily tape them together from the back.
User's Guide Printing 8. Cut the taped sheets in two along the horizontal red line through the alignment markers (this time, the line above the cross marks). 9. Tape the sheets together from the back.
User's Guide Printing 10. Cut off the remaining margins along the outer guide. Printing Using Advanced Features This section introduces a variety of additional layout and printing features available on the printer driver. Related Information & “Windows Printer Driver” on page 94 & “Mac OS X Printer Driver” on page 95 Adding a Printing Preset to Print Easily If you create your own preset of frequently used print settings on the printer driver, you can print easily by selecting the preset from the list.
User's Guide Printing Windows To add your own preset, set items such as the Document Size and Paper Type on the Main or More Options tab, and then click Add/Remove Presets in Printing Presets. Note: To delete an added preset, click Add/Remove Presets, select the preset name you want to delete from the list, and then delete it. Mac OS X Access the print dialog. To add your own preset, set items such as the Paper Size and Media Type, and then save the current settings as the preset in the Presets setting.
User's Guide Printing Mac OS X Access the print dialog. Select Color Matching from the pop-up menu, and then select EPSON Color Controls. Select Color Options from the pop-up menu, and then select one of the available options. Click the arrow next to Advanced Settings and make the appropriate settings. Printing an Anti-Copy Pattern (for Windows Only) You can print documents with invisible letters such as "Copy".
User's Guide Printing Printing from Smart Devices Using Epson iPrint Epson iPrint is an application that allows you to print photos, documents, and Web pages from a smart device such as a smartphone or tablet. You can use either local print, printing from a smart device that is connected to the same wireless network as your printer, or remote print, printing externally over the internet. To use remote print, register your printer in the Epson Connect service.
User's Guide Printing B Displays information on how to setup the printer and a FAQ. C Displays the screen where you can select the printer and make printer settings. Once you have selected the printer, you do not need to select it again from the next time. D Select what you want to print such as photos, documents, and web pages. E Displays the screen to make print settings such as paper size and paper type. F Displays photos and documents you selected. G Starts printing.
User's Guide Printing Canceling Printing Note: ❏ In Windows, you cannot cancel a print job from the computer once it has been completely sent to the printer. In this case, cancel the print job by using the printer's control panel. ❏ When printing several pages from Mac OS X, you cannot cancel all of the jobs by using the control panel. In this case, cancel the print job from the computer. ❏ If you have sent a print job from Mac OS X v10.6.
User's Guide Copying Copying 1. Load paper in the printer. 2. Place the originals. 3. Enter Copy from the home screen. 4. Press the u and d buttons to enter the number of copies. 5. Press the OK button. 6. Select Layout, and then select the appropriate layout. 7. Press the d button, and then make other settings as necessary. 8. Press the x button.
User's Guide Scanning Scanning Scanning Using the Control Panel Scanning to the Cloud You can send scanned images to cloud services using Epson Connect. See the Epson Connect portal website for details. https://www.epsonconnect.com/ http://www.epsonconnect.eu (Europe only) Related Information & “Scan Mode” on page 17 Scanning to a Computer c Important: Make sure you have installed the EPSON Scan and Epson Event Manager on your computer before using this feature. 1. Place the originals. 2.
User's Guide Scanning Scanning to a Computer (WSD) Note: ❏ This feature is only available for computers running Windows 8.1/Windows 8/Windows 7/Windows Vista. ❏ If you are using Windows 7/Windows Vista, you need to setup your computer in advance using this feature. See the Network Guide for more details. 1. Place the originals. 2. Enter Scan from the home screen. 3. Select Computer (WSD). 4. Select a computer. 5. Press the x button.
User's Guide Scanning 3. Select Home Mode from the Mode list. 4. Make the following settings. ❏ Document Type: Select the type of the original you want to scan. ❏ Image Type: Select the color type of the image you want to scan. Although this is automatically selected by the Document Type setting, you can change the setting. ❏ Destination: Select the resolution of the image you want to scan. If you select Other, you can set Resolution.
User's Guide Scanning 5. Click Preview. Note: ❏ Depending on the photos and the scanning conditions, the scan results may not be as intended. Clear Thumbnail, and only place one photo. ❏ When placing multiple photos, place them at least 20 mm (0.8 inch) apart. Also, the edge area of the scanner glass is not scanned. 6. Adjust the quality or brightness of the image as necessary. Note: Depending on the originals, the scan results may not be as intended. 7. Click Scan. 8.
User's Guide Scanning Note: ❏ If you want to scan many documents to one file, save in PDF format. ❏ If you are using the ADF and want to click Preview, only load the first page of the original you want to preview. After previewing, load the entire original including the first page you have previewed, and then click Scan. Scanning by Adjusting the Image Quality (Professional Mode) You can scan images while adjusting the quality and color. This mode is recommended for advanced users.
User's Guide Scanning Note: ❏ If you want to scan using the ADF, select ADF as the Document Source. ❏ If you are using the ADF and want to click Preview, only load the first page of the original you want to preview. After previewing, load the entire original including the first page you have previewed, and then click Scan.
User's Guide Scanning Scanning from Smart Devices Epson iPrint is an application that allows you to scan photos and documents from a smart device, such as a smartphone or tablet, that is connected to the same wireless network as your printer. You can save the scanned data on a smart device or to Cloud services, send it by email, or print it. You can install Epson iPrint on your smart device from the following URL or QR code. http://ipr.
User's Guide Scanning H Displays the screen where you can save scanned data to a smart device or Cloud services. I Displays the screen where you can send scanned data by email. J Displays the screen where you can print scanned data.
User's Guide Faxing Faxing Setting Up a Fax Connecting to a Phone Line Compatible Telephone Lines You can use the printer over standard analogue telephone lines (PSTN = Public Switched Telephone Network) and PBX (Private Branch Exchange) telephone systems. You may not be able to use the printer with the following phone lines or systems.
User's Guide Faxing Connecting to a Standard Phone Line (PSTN) or PBX Connect a phone cable from the telephone wall jack or PBX port to the LINE port on the back of the printer. Related Information & “Making Settings for a PBX Phone System” on page 69 Connecting to DSL or ISDN Connect a phone cable from the DSL modem or the ISDN terminal adapter to the LINE port on the back of the printer. See the documentation provided with the modem or the adapter for more details.
User's Guide Faxing Connecting Your Phone Device to the Printer When using the printer and your telephone on a single phone line, connect the telephone to the printer. Note: ❏ If your phone device has a fax function, disable the fax function before connecting. See the documentation provided with the phone device for more details. ❏ Set the number of Rings to Answer before receiving faxes to a larger number than for the answering machine. 1. Remove the cap from the EXT. port on the back of the printer.
User's Guide Faxing 2. Connect the phone device and the EXT. port with a phone cable. c Important: When sharing a single phone line, make sure you connect the phone device to the EXT. port of the printer. If you split the line to connect the phone device and the printer separately, the phone and the printer do not work correctly. 3. Pick up the handset of the connected phone device and confirm that a message asking you to select whether to send or receive a fax is displayed on the LCD screen.
User's Guide Faxing 1. Connect the printer to the phone line. c Important: Because an automatic fax connection check runs at the end of the wizard, make sure you connect the printer to the phone line before starting the wizard. 2. Enter Setup from the home screen. 3. Select Fax Settings > Fax Setting Wizard, and then press the u button. The wizard begins. 4. On the fax header entry screen, enter your sender name such as your company name.
User's Guide Faxing Note: ❏ If there are any errors reported, follow the instructions on the report to solve them. ❏ If you are prompted to select the line type, select the line type. When you are connecting the printer to a PBX phone system or terminal adapter, select PBX. ❏ If the screen indicates that the dial tone is not detected, press the u button to disable the dial tone detection feature.
User's Guide Faxing Registering Contacts for Faxing Registering frequently used fax numbers to a contact list allows you to easily send faxes. You can group some entries together to send a fax to multiple recipients at a time. Up to 60 entries (a group entry is counted as one) can be registered. Registering Contacts 1. Press the button in Fax mode. 2. Press the button, and then select Add Entry. 3. Select the entry number that you want to register. 4. Enter a name and fax number.
User's Guide Faxing 6. Press the OK button to register the contacts as a group. Note: To edit or delete a grouped contact, select the target grouped contact, press the r button, and then select Edit or Delete. Registration and Backup of Contacts Using a Computer Using FAX Utility, you can create a contact list on your computer and import it to the printer. You can also back up the contact data stored in the printer to the computer. See the help of FAX Utility for details.
User's Guide Faxing 4. Press the OK button, and then make settings such as the resolution and the sending method as necessary. 5. Press the x button. Note: ❏ To cancel sending, press the y button. ❏ It takes longer to send a fax in color because the printer performs scanning and sending simultaneously. While the printer is sending a color fax, you cannot use the other features. ❏ Depending on the contents of the original and the resolution you selected, the time required for sending a fax varies.
User's Guide Faxing 1. Place the originals. 2. Enter Fax from the home screen. 3. Specify the recipient. 4. Press the OK button, and then select Send Fax Later. 5. Select On, and then press the OK button. 6. Enter the time to send the fax, and then press the OK button. 7. Make settings such as the resolution and the density as necessary. 8. Press the x button. Note: Until the fax is sent at the specified time, you cannot send other faxes.
User's Guide Faxing Receiving Faxes Setting Receiving Mode You can set Receive Mode using the Fax Setting Wizard. When you set up the fax feature for the first time, we recommend using the Fax Setting Wizard. If you want to change the Receive Mode settings individually, follow the steps below. 1. Enter Setup from the home screen. 2. Select Fax Settings > Receive Settings > Receive Mode. 3. Select how to receive. ❏ Auto: Recommended for heavy fax users.
User's Guide Faxing Various Ways of Receiving Faxes Receiving Faxes Manually When you connect a telephone and set the Receive Mode setting of the printer to Manual, follow the steps below to receive faxes. 1. When the telephone rings, pick up the handset. 2. When you hear a fax tone, select Receive on the printer's control panel. Note: If you enable the Remote Receive feature, you can start receiving a fax just by using the connected telephone. 3. Press the x button, and then hang up the handset.
User's Guide Faxing Receiving Faxes by Polling (Polling Receive) You can receive a fax stored on another fax machine by dialing the fax number. Use this feature to receive a document from a fax information service. However, if the fax information service has an audio guidance feature that you need to follow to receive a document, you cannot use this feature.
User's Guide Faxing 6. Select Fax Settings > Output Settings > Fax Output. 7. The current setting is displayed. Check that the printer is set to save faxes on a computer. If you want to automatically print received documents while saving them on the computer, select Save then Print. Note: To stop saving received document on the computer, set Fax Output to Print on the printer.
User's Guide Faxing Related Information & “Fax Mode” on page 18 & “Fax Settings” on page 22 Reprinting Received Faxes You can reprint received documents that you have already printed. All of the received documents saved in the printer's memory are printed in reverse chronological order. However, if the printer runs out of memory, documents that have already been printed are automatically deleted starting with the oldest document. 1. Enter Fax from the home screen. 2.
User's Guide Refilling Ink Refilling Ink Checking the Ink Levels To confirm the actual ink remaining, visually check the ink levels in all of the printer's tanks. You can check the approximate ink levels from the computer. Checking the Ink Levels - Windows 1. Access the printer driver window. 2. Click Ink Levels on the Main tab. Note: If EPSON Status Monitor 3 is disabled, the ink levels are not displayed. Click Extended Settings on the Maintenance tab, and then select Enable EPSON Status Monitor 3.
User's Guide Refilling Ink Note: For users in Europe, visit the following website for information on Epson's ink bottle yields. http://www.epson.eu/pageyield Ink Bottle Handling Precautions Read the following instructions before refilling ink. Handling precautions ❏ Use ink bottles with the correct part code for this printer. ❏ This printer requires careful handling of ink. Ink may splatter when the ink tanks are filled or refilled with ink. If ink gets on your clothes or belongings, it may not come off.
User's Guide Refilling Ink Refilling the Ink Tanks 1. Enter Setup from the home screen. 2. Select Maintenance > Reset Ink Levels. 3. Press the x button. 4. Open the ink tank unit cover, and then remove the cap of the ink tank. After removing the cap, place it as shown in the illustration below. c Important: ❏ Be careful not to spill any ink. ❏ Make sure that the color of the ink tank matches the ink color that you want to refill. 5.
User's Guide Refilling Ink c Important: Close the ink bottle cap tightly; otherwise ink may leak. Note: Do not dispose of the top of the cap. If any ink remains in the ink bottle after refilling the tank, use the top of the cap to seal the ink bottle cap. 6. Refill the ink tank with the correct colored ink up to the upper line on the ink tank. c Important: It may be difficult to see inside the ink tank. Refill the ink tank carefully to prevent ink from spilling out from the ink inlet.
User's Guide Refilling Ink 7. Close the cap onto the ink tank securely. 8. Close the ink tank unit cover. 9. Press the OK button. 10. Follow the instructions on the LCD screen to reset the ink levels. Note: You can reset the ink levels even if you did not fill the ink to the upper line. Note that doing so may cause a difference between the approximate ink levels and the actual ink levels.
User's Guide Improving Print and Scan Quality Improving Print and Scan Quality Checking and Cleaning the Print Head If the nozzles are clogged, the printouts become faint, there is visible banding, or unexpected colors appear. When print quality has declined, use the nozzle check feature and check if the nozzles are clogged. If the nozzles are clogged, clean the print head. c Important: Do not open the scanner unit or turn off the printer during head cleaning.
User's Guide Improving Print and Scan Quality ❏ There are broken lines or missing segments: The print head nozzles may be clogged. Go to the next step. 6. Follow the on-screen instructions to clean the print head. 7. When cleaning is finished, print the nozzle check pattern again. Repeat cleaning and printing the pattern until all lines are printed completely. Related Information & “Loading Paper in the Paper Cassette” on page 27 Checking and Cleaning the Print Head - Windows 1.
User's Guide Improving Print and Scan Quality Replacing Ink inside the Ink Tubes If you have not used the printer for a long time and notice banding or missing colors in the printouts, you may need to replace the ink inside the ink tubes to solve the problem. The Power Ink Flushing utility allows you to replace all of the ink inside the ink tubes. c Important: ❏ This feature consumes a lot of ink. Before using this feature, make sure there is enough ink in the printer’s ink tanks.
User's Guide Improving Print and Scan Quality 2. Enter Setup from the home screen. 3. Select Maintenance > Print Head Alignment. 4. Select Vertical Alignment or Horizontal Alignment, and then follow the on-screen instructions to print an alignment pattern. ❏ Vertical Alignment: Select this if your printouts look blurry or vertical ruled lines appear misaligned. ❏ Horizontal Alignment: Select this if you see horizontal banding at regular intervals. Note: The test pattern may vary by model. 5.
User's Guide Improving Print and Scan Quality Related Information & “Loading Paper in the Paper Cassette” on page 27 & “Windows Printer Driver” on page 94 Aligning the Print Head - Mac OS X 1. Load A4-size plain paper in the printer. 2. Select System Preferences from the then select the printer. 3. Click Options & Supplies > Utility > Open Printer Utility. 4. Click Print Head Alignment. 5. Follow the on-screen instructions.
User's Guide Improving Print and Scan Quality c Important: Never use alcohol or thinner to clean the printer. These chemicals can damage the printer. 1. Open the ADF cover. 2. Use a soft, dry, clean cloth to clean the roller and the interior of the ADF.
User's Guide Improving Print and Scan Quality 3. Open the document cover. 4. Clean the part that is shown in the illustration. Note: ❏ If the glass surface is stained with grease or some other hard-to-remove material, use a small amount of glass cleaner and a soft cloth to remove it. Wipe off all remaining liquid. ❏ Do not press the glass surface too hard. ❏ Be careful not to scratch or damage the surface of the glass. A damaged glass surface can decrease the scan quality.
User's Guide Improving Print and Scan Quality ! Caution: Be careful not to trap your hand or fingers when opening or closing the document cover. Otherwise you may be injured. c Important: Never use alcohol or thinner to clean the printer. These chemicals can damage the printer. 1. Open the document cover. 2. Use a soft, dry, clean cloth to clean the surface of the scanner glass.
User's Guide Network Service and Software Information Network Service and Software Information This section introduces the network services and software products available for your printer from the Epson website or the supplied CD. Epson Connect Service By using Epson Connect service available on the Internet, you can print from your smartphone, tablet PC, or laptop, anytime and practically anywhere. The features available on the Internet are as follows.
User's Guide Network Service and Software Information Running Web Config on a Web Browser 1. Check the printer's IP address. Select Setup > Network Settings > Network Status > Wired LAN/Wi-Fi Status or Wi-Fi Status from the home screen, and then check the printer's IP address. 2. Launch a Web browser from a computer or smart device, and then enter the printer's IP address. Format: IPv4: http://the printer's IP address/ IPv6: http://[the printer's IP address]/ Examples: IPv4: http://192.168.100.
User's Guide Network Service and Software Information Windows Printer Driver The printer driver controls the printer according to the commands from an application. Making settings on the printer driver provides the best printing results. You can also check the status of the printer or keep it in top operating condition using the printer driver utility. Note: You can change the language of the printer driver. Select the language you want to use from the Language setting on the Maintenance tab.
User's Guide Network Service and Software Information Click the start button, and select Control Panel > View devices and printers in Hardware and Sound. Right-click on your printer, and then select Printer properties. Click the Optional Settings tab. ❏ Windows Vista/Windows Server 2008 Click the start button, and select Control Panel > Printers in Hardware and Sound. Right-click on your printer, and then select Properties. Click the Optional Settings tab.
User's Guide Network Service and Software Information Making Operation Settings for the Mac OS X Printer Driver Accessing the Operation Settings Window of the Mac OS X Printer Driver Select System Preferences from the menu > Printers & Scanners (or Print & Scan, Print & Fax), and then select the printer. Click Options & Supplies > Options (or Driver). Operation Settings of the Mac OS X Printer Driver ❏ Skip Blank Page: Avoids printing blank pages. ❏ Quiet Mode: Prints quietly.
User's Guide Network Service and Software Information Note: Windows Server operating systems are not supported. Starting on Windows ❏ Windows 8.1/Windows 8 Enter the application name in the search charm, and then select the displayed icon. ❏ Windows 7/Windows Vista/Windows XP Click the start button, and select All Programs or Programs > Epson Software > Event Manager. Starting on Mac OS X Select Go > Applications > Epson Software > Event Manager.
User's Guide Network Service and Software Information Starting on Windows ❏ Windows 8.1/Windows 8 Enter the application name in the search charm, and then select the displayed icon. ❏ Windows 7/Windows Vista/Windows XP Click the start button, and select All Programs (or Programs) > Epson Software > FAX Utility. Starting on Mac OS X menu > Printers & Scanners (or Print & Scan, Print & Fax), and then Select System Preferences from the select the printer (FAX).
User's Guide Network Service and Software Information EPSON Software Updater EPSON Software Updater is an application that checks for new or updated software on the internet and installs it. You can also update the printer's firmware and manual. Note: Windows Server operating systems are not supported. Starting on Windows ❏ Windows 8.1/Windows 8 Enter the application name in the search charm, and then select the displayed icon.
User's Guide Network Service and Software Information 3. Open Control Panel: ❏ Windows 8.1/Windows 8/Windows Server 2012 R2/Windows Server 2012 Select Desktop > Settings > Control Panel. ❏ Except for Windows 8.1/Windows 8/Windows Server 2012 R2/Windows Server 2012 Click the start button and select Control Panel. 4. Open Uninstall a program (or Add or Remove Programs): ❏ Windows 8.
User's Guide Network Service and Software Information Note: If you cannot find the application you want to uninstall in the application list, you cannot uninstall using the Uninstaller. In this situation, select Go > Applications > Epson Software, select the application you want to uninstall, and then drag it to the trash icon.
User's Guide Network Service and Software Information Related Information & “EPSON Software Updater” on page 99 102
User's Guide Solving Problems Solving Problems Checking the Printer Status Checking Messages on the LCD Screen If an error message is displayed on the LCD screen, follow the on-screen instructions or the solutions below to solve the problem. Error Messages Solutions Printer Error 0xXX Remove any paper or protective material in the printer. If the error message is still displayed after turning the power off and on again, contact Epson support. Turn the power off and on again.
User's Guide Solving Problems number of cleaning cycles that the printer performs. The need for replacement of the pad does not mean that your printer has ceased to operate in accordance with its specifications. The printer will advise you when the pad requires replacing and this can only be performed by an authorised Epson Service provider. The Epson warranty does not cover the cost of this replacement.
User's Guide Solving Problems Removing Jammed Paper from Inside the Printer ! Caution: ❏ Be careful not to trap your hand or fingers when opening or closing the scanner unit. Otherwise you may be injured. ❏ Never touch the buttons on the control panel while your hand is inside the printer. If the printer starts operating, it could cause an injury. Be careful not to touch the protruding parts to avoid injury. 1. Open the scanner unit with the document cover closed. 2. Remove the jammed paper.
User's Guide Solving Problems c Important: Do not touch the white flat cable, translucent part, and ink tubes inside the printer. Doing so may cause a malfunction. 3. Close the scanner unit. Removing Jammed Paper from the Paper Cassette 1. Close the output tray.
User's Guide Solving Problems 2. Pull out the paper cassette. 3. Remove the jammed paper. 4. Align the edges of the paper and slide the edge guides to the edges of the paper. 5. Insert the paper cassette in the printer.
User's Guide Solving Problems Removing Jammed Paper from the Rear Cover 1. Remove the rear cover. 2. Remove the jammed paper. 3. Remove jammed paper from the rear cover.
User's Guide Solving Problems 4. Open the cover of the rear cover. 5. Remove the jammed paper. 6. Close the cover of the rear cover, and then insert the rear cover in the printer. Removing Jammed Paper from the ADF ! Caution: Be careful not to trap your fingers when closing the document cover. Otherwise you may be injured.
User's Guide Solving Problems 1. Open the ADF cover. 2. Remove the jammed paper. 3. Open the document cover.
User's Guide Solving Problems 4. Remove the jammed paper. 5. Close the document cover. 6. Raise the ADF input tray, and then remove the jammed paper. 7. Close the ADF cover. Paper Does Not Feed Correctly Check the following points, and then take the appropriate actions to solve the problem. ❏ Place the printer on a flat surface and operate in the recommended environmental conditions. ❏ Use paper supported by this printer. ❏ Follow the paper handling precautions.
User's Guide Solving Problems Related Information & “Environmental Specifications” on page 132 & “Available Paper and Capacities” on page 26 & “Paper Handling Precautions” on page 25 Paper Jams Load paper in the correct direction, and slide the edge guides against the edges of the paper. Related Information & “Loading Paper in the Paper Cassette” on page 27 Paper Feeds at a Slant Load paper in the correct direction, and slide the edge guides against the edges of the paper.
User's Guide Solving Problems & “Cleaning the ADF” on page 88 Power and Control Panel Problems Power Does Not Turn On ❏ Hold down the P button for a little longer. ❏ Make sure the power cord is securely plugged in. Power Does Not Turn Off Hold down the P button for a little longer. If you still cannot turn off the printer, unplug the power cord. To prevent the print head from drying out, turn the printer back on and turn it off by pressing the P button. LCD Screen Gets Dark The printer is in sleep mode.
User's Guide Solving Problems ❏ If you are using the printer through AirPrint, enable the AirPrint setting on Web Config. If this setting is disabled, you cannot use AirPrint.
User's Guide Solving Problems & “Available Paper and Capacities” on page 26 & “List of Paper Types” on page 27 & “Paper Handling Precautions” on page 25 & “Checking and Cleaning the Print Head” on page 84 & “Aligning the Print Head” on page 86 Print Quality Does Not Improve Even After Aligning the Print Head During bidirectional (or high speed) printing, the print head prints while moving in both directions, and vertical lines may be misaligned.
User's Guide Solving Problems ❏ If a moiré (cross-hatch) pattern appears, change the reduce and enlarge setting or place the original at a slightly different angle. ❏ When the paper is smeared, lower the copy density setting.
User's Guide Solving Problems ❏ Clean the scanner glass and the document cover. ❏ Load paper in the correct direction. ❏ When performing manual 2-sided printing, make sure that the ink is completely dry before reloading the paper. ❏ When printing high-density data such as images or graphs using automatic 2-sided printing, lower the print density setting and choose a longer drying time. ❏ When the paper is smeared during copying, lower the copy density setting on the control panel.
User's Guide Solving Problems Other Printing Problems Printing Is Too Slow ❏ Close any unnecessary applications. ❏ Lower the quality setting. High quality printing slows down the printing speed. ❏ Enable the bidirectional (or high speed) setting. When this setting is enabled, the print head prints while moving in both directions, and the printing speed increases. ❏ Windows Select High Speed on the printer driver's More Options tab.
User's Guide Solving Problems ❏ In Windows, make sure the printer (scanner) is displayed in Scanner and Camera. The printer (scanner) should be displayed as "EPSON XXXXX (printer name)". If the printer (scanner) is not displayed, uninstall and then re-install EPSON Scan. See the following to access Scanner and Camera. ❏ Windows 8.
User's Guide Solving Problems ❏ Scan at a higher resolution. ❏ Adjust the image in EPSON Scan, and then scan. See the EPSON Scan help for details. Related Information & “Cleaning the Scanner Glass” on page 90 & “Cleaning the ADF” on page 88 Characters Are Blurred ❏ In Home Mode or Office Mode in EPSON Scan, select Image Option from the Image Adjustments setting, and then select Text Enhancement. ❏ In Professional Mode in EPSON Scan, select Document as the Auto Exposure Type in the Original settings.
User's Guide Solving Problems ❏ When you place multiple originals on the scanner glass to scan them separately, but they are scanned onto a single file, place the originals at least 20 mm (0.8 inch) apart. If the problem continues, place one original at a time. ❏ Set the scan area correctly. ❏ When scanning using the thumbnail preview in EPSON Scan, move the original 4.5 mm (0.18 inch) away from the edges of the scanner glass.
User's Guide Solving Problems Scanning Stops when Scanning to PDF/Multi-TIFF ❏ When scanning using EPSON Scan, you can scan up to 999 pages in PDF format and up to 200 pages in MultiTIFF format. When scanning using the control panel, you can scan up to 50 pages in PDF format and in MultiTIFF format. ❏ When scanning large volumes, we recommend scanning in grayscale. ❏ Increase the free space on the computer's hard disk. Scanning may stop if there is not enough free space.
User's Guide Solving Problems ❏ In Windows, make sure the printer (fax) is displayed in Devices and Printers, Printer, or Printers and Other Hardware. The printer (fax) is displayed as "EPSON XXXXX (FAX)". If the printer (fax) is not displayed, uninstall and then re-install the FAX Utility. See the following to access Devices and Printers, Printer, or Printers and Other Hardware. ❏ Windows 8.1/Windows 8 Select Desktop > Settings > Control Panel > View devices and printers in Hardware and Sound or Hardware.
User's Guide Solving Problems ❏ If the recipient machine does not pick up your call within 50 seconds after the printer has finished dialing, the call ends with an error. Dial using a connected telephone to check how long it takes before you hear a fax tone. If to enter the pause. A it takes more than 50 seconds, add pauses after the fax number to send the fax. Press hyphen is entered as the pause mark. One pause is about three seconds. Add multiple pauses as needed.
User's Guide Solving Problems Sent Fax Quality Is Poor ❏ Clean the scanner glass and the document cover. ❏ Clean the roller in the ADF. ❏ Change the Resolution setting on the control panel. If your originals contain both text and photos, select Photo. ❏ Change the Density setting on the control panel. ❏ Enable the ECM setting on the control panel.
User's Guide Solving Problems Other Faxing Problems Cannot Make Calls on the Connected Telephone Connect the telephone to the EXT. port on the printer, and pick up the receiver. If you cannot hear a dial tone through the receiver, connect the phone cable correctly.
User's Guide Solving Problems The ADF Does Not Work There may be dust in the hole at the front-left of the scanner glass. Clean out any dust. Scanning from ADF Slows Down When scanning using ADF continuously for approximately more than five minutes, scanning slows down to prevent the scanner mechanism from overheating and being damaged. However, you can continue scanning. To regain normal scanning speed, leave the ADF idle for at least 30 minutes. Scanning speed does not recover if the power is off.
User's Guide Appendix Appendix Technical Specifications Printer Specifications Print Head Nozzle Placement Black ink nozzles: 400 Color ink nozzles: 128 for each color Weight of Paper Plain Paper 64 to 90 g/m2(17 to 24lb) Envelopes Envelope #10, DL, C6: 75 to 90 g/m2 (20 to 24 lb) Printable Area Print quality may decline in the shaded areas due to the printer's mechanism. Single sheets (normal printing) A 3.0 mm (0.12 in.) B 3.0 mm (0.12 in.) C 47.0 mm (1.85 in.) D 45.0 mm (1.77 in.) A 3.
User's Guide Appendix Maximum Document Size 216 × 297 mm (8.5 × 11.7 in.) A4, Letter Scanning Resolution 1200 dpi (main scan) 2400 dpi (sub scan) Output Resolution 50 to 4800, 7200, 9600 dpi (50 to 4800 dpi in 1 dpi increments.
User's Guide Appendix * The specifications may differ by country or region. Wi-Fi Specifications Standards IEEE802.11b/g/n*1 Frequency Range 2.4 GHz Coordination Modes Infrastructure, Ad hoc*2, Wi-Fi Direct*3 *4 Wireless Securities WEP (64/128bit), WPA2-PSK (AES)*5 *1 Complies with either IEEE 802.11b/g/n or IEEE 802.11b/g depending on location of purchase. *2 Not supported for IEEE 802.11n. *3 Not supported for IEEE 802.11b.
User's Guide Appendix Dimensions Dimensions Storage ❏ Width: 515 mm (20.3 in.) ❏ Depth: 360 mm (14.2 in.) ❏ Height: 241 mm (9.5 in.) Printing ❏ Width: 515 mm (20.3 in.) ❏ Depth: 559 mm (22.0 in.) ❏ Height: 241 mm (9.5 in.) Weight* * Approx. 7.4 kg (16.3 lb) Without the ink and the power cord. Electrical Specifications Model 100 to 240 V Model 220 to 240 V Model Rated Frequency Range 50 to 60 Hz 50 to 60 Hz Rated Current 0.5 to 0.3 A 0.
User's Guide Appendix Environmental Specifications Operation Use the printer within the range shown in the following graph. Temperature: 10 to 35°C (50 to 95°F) Humidity: 20 to 80% RH (without condensation) Storage Temperature: -20 to 40°C (-4 to 104°F)* Humidity: 5 to 85% RH (without condensation) * You can store for one month at 40°C (104°F).
User's Guide Appendix Regulatory Information Standards and Approvals Standards and Approvals for U.S. Model Safety UL60950-1 CAN/CSA-C22.2 No.60950-1 EMC FCC Part 15 Subpart B Class B CAN/CSA-CEI/IEC CISPR 22 Class B This equipment contains the following wireless module. Manufacturer: Askey Computer Corporation Type: WLU6320-D69 (RoHS) This product conforms to Part 15 of the FCC Rules and RSS-210 of the IC Rules.
User's Guide Appendix For use only in Ireland, UK, Austria, Germany, Liechtenstein, Switzerland, France, Belgium, Luxemburg, Netherlands, Italy, Portugal, Spain, Denmark, Finland, Norway, Sweden, Iceland, Croatia, Cyprus, Greece, Slovenia, Malta, Bulgaria, Czech, Estonia, Hungary, Latvia, Lithuania, Poland, Romania, and Slovakia. Epson cannot accept responsibility for any failure to satisfy the protection requirements resulting from a nonrecommended modification of the products.
User's Guide Appendix Checking the Total Number of Pages Fed Through the Printer Control Panel The information is printed together with the nozzle check pattern. 1. Load A4-size plain paper in the printer. 2. Enter Setup from the home screen. 3. Select Maintenance > Print Head Nozzle Check. 4. Follow the on-screen instructions to print the nozzle check pattern. Checking the Total Number of Pages Fed Through the Printer Windows 1. Access the printer driver window. 2.
User's Guide Appendix Transporting the Printer When you need to transport the printer to move or for repairs, follow the steps below to pack the printer. ! Caution: Be careful not to trap your hand or fingers when opening or closing the scanner unit. Otherwise you may be injured. c Important: ❏ When storing or transporting the printer, avoid tilting it, placing it vertically, or turning it upside down; otherwise ink may leak.
User's Guide Appendix 6. Open the scanner unit with the document cover closed. Secure the print head to the case with tape. 7. Close the scanner unit. 8. Prepare to pack the printer as shown below.
User's Guide Appendix 9. Make sure to install the cap onto the ink tank securely. 10. Pack the printer in its box using the protective materials. When you use the printer again, make sure you remove the tape securing the print head. If print quality has declined the next time you print, clean and align the print head.
User's Guide Appendix ❏ Product model ❏ Product software version (Click About, Version Info, or a similar button in the product software.) ❏ Brand and model of your computer ❏ Your computer operating system name and version ❏ Names and versions of the software applications you normally use with your product Note: Depending on the product, the dial list data for fax and/or network settings may be stored in the product’s memory. Due to breakdown or repair of a product, data and/or settings may be lost.
User's Guide Appendix Telephone number Fax number Address 03-5325077 03-5320092 1F., No.9, Ln. 379, Sec. 1, Jingguo Rd., North Dist., Hsinchu City 300, Taiwan 04-23011502 04-23011503 3F., No.30, Dahe Rd., West Dist., Taichung City 40341, Taiwan 04-2338-0879 04-2338-6639 No.209, Xinxing Rd., Wuri Dist., Taichung City 414, Taiwan 05-2784222 05-2784555 No.463, Zhongxiao Rd., East Dist., Chiayi City 600, Taiwan 06-2221666 06-2112555 No.141, Gongyuan N. Rd., North Dist.
User's Guide Appendix Access the Epson New Zealand World Wide Web pages. Worth taking your modem here for the occasional surf! The site provides a download area for drivers, Epson contact points, new product information and technical support (e-mail). Epson Helpdesk Epson Helpdesk is provided as a final backup to make sure our clients have access to advice. Operators on the Helpdesk can aid you in installing, configuring and operating your Epson product.
User's Guide Appendix Help for Users in Vietnam Contacts for information, support, and services are: Epson Hotline (Phone): 84-8-823-9239 Service Center: 80 Truong Dinh Street, District 1, Hochiminh City, Vietnam. Help for Users in Indonesia Contacts for information, support, and services are: World Wide Web http://www.epson.co.
User's Guide Appendix Help for Users in Hong Kong To obtain technical support as well as other after-sales services, users are welcome to contact Epson Hong Kong Limited. Internet Home Page Epson Hong Kong has established a local home page in both Chinese and English on the Internet to provide users with the following information: ❏ Product information ❏ Answers to Frequently Asked Questions (FAQs) ❏ Latest versions of Epson product drivers Users can access our World Wide Web home page at: http://www.
User's Guide Appendix World Wide Web http://www.epson.co.in Information on product specifications, drivers for download, and products enquiry are available.
User's Guide Appendix Toll-Free No.
