Operation Manual

64
If no patterns are aligned in one or more of the sets, choose the closest one in each set and
click Realignment. Then print another alignment sheet and check it.
7. When you’re done, click Finish.
Clean the Paper Guide
If you see ink on the back of a printout, you can clean the paper guide to remove any excess ink.
1. Make sure that no lights are indicating errors, that the CD/DVD tray is not inserted in the
printer, and that the output tray is in the paper position.
2. Load a few sheets of plain paper in the sheet feeder.
3. Right-click the paper button on the printer’s control panel to feed and eject the paper.
4. Repeat as necessary until the paper comes out clean.
Caution:
Do not apply grease to the metal parts under the print head.
Be careful to keep water away from the electronic components.
Do not spray the inside of the printer with lubricants.