User`s guide

18 | Customizing Your Labels
Adding space between characters
You can add extra space between the letters,
numbers, and symbols on your label.
1. Press .
2. Press until you see Char. spacing,
then press to select it.
3. Press to change from Narrow to
Wide, then press .
Selecting narrow characters
You can change from normal characters and
symbols to narrow ones.
1. Press .
2. Press until you see Narrow, then
press to select it.
3. Press again to select Narrow.
Increasing print density
You can make the print on your labels darker
if necessary.
1. When the power is off, press + .
Print density appears on the display.
2. Press .
3. Press to adjust the print density, then
press to select the density you want.
Note: The default value (0) is recommended.
Adding punctuation
In addition to the basic punctuation marks
shown on the keyboard, you can select from
two more groups of punctuation marks, as
shown below:
; ( ) < > [ ] { }
Group 1
Group 2
cable.book Page 18 Wednesday, May 22, 2013 3:25 PM