Iron-on Kit User’s Guide LW300_IronOn_UGcover_CPD38096.
LabelWorks tapes available at www.epson.com/LabelWorks LC-4WBN9 LC-4BWN9 LC-4LBQ5 Pearlized CPD-38096 LW300_IronOn_UGcover_CPD38096.
Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Customizing your labels . . . . . . . . . . . . . . . . . . . 18 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Creating vertical text . . . . . . . . . . . . . . . . . . . . . 18 Using mirror-image text . . . . . . . . . . . . . . . . . . 18 Creating sequentially numbered labels. . . . 19 Customizing the length of labels . . . . . . . . . . 19 Adding space between characters . . . .
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Safety instructions. . . . . . . . . . . . . . . . . . . . . . . . 29 About printed labels. . . . . . . . . . . . . . . . . . . . . . 32 FCC Compliance Statement. . . . . . . . . . . . . . . 32 Epson America, Inc. Limited Warranty . . . . . 33 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Welcome Your LabelWorks Iron-on Kit lets you create attractive, long-lasting labels for uniforms, clothing, backpacks, and other fabric items. Get creative by adding symbols and frames for holidays, sports, animals, food, and more! Use iron-on labels for: ■ day care ■ school ■ camp ■ nursing homes ■ handmade craft projects Save up to 30 labels to reuse at any time. The kit includes two iron-on cartridges so you can print more than 150 labels.
Getting Started 2. Insert 6 AAA alkaline batteries, positioning the + and - ends as shown. Your Label Works printer requires 6 AAA batteries (not included). An optional AC adapter is also available (APT0615Z1-1). Follow the instructions in this section to insert the batteries and tape cartridge, and change the language if necessary. Inserting batteries 1. Remove the rear cover. 4 | Getting Started 3. Replace the cover and snap it into place.
Using the optional AC adapter Inserting a tape cartridge 1. Plug one end of the AC adapter into the product. 1. Remove any slack from the ink ribbon. 2. Plug the other end of the AC adapter into a wall outlet. 2. Remove the rear cover. Caution: Make sure you use only the AC adapter designed for your LabelWorks printer (APT0615Z1-1) or damage may occur. 3. Insert the tape cartridge and press it down firmly until it snaps into place.
4. If there is excess tape, feed the end of the tape through the tape guide slot. Removing a tape cartridge 1. Remove the rear cover. 2. Hold the cartridge by the tabs, and lift it straight up. 5. Replace the cover and snap it into place. 6. Press to turn on the printer. 7. Press + 8. Press the . Cut button to cut the tape. Warning: Do not press the Cut button until the tape stops moving or the tape cartridge may be damaged.
Creating labels You can create labels with text, symbols, and frames in a variety of fonts and styles. Adding punctuation You can select from two groups of punctuation marks, as shown below: Group 1 Entering text Use the built-in keyboard to enter letters and numbers. ■ Press to use upper case for all letters, or + character for a single letter. ■ Press to delete the previous character. ■ Press to start a new line. The line number is indicated on the display.
Adding letters with an accent mark You can choose from a list of accented letters on the display. 1. Enter the letter that needs an accent mark. 2. Press . A list of options appears on the display (for example, ÀÁÂ). 3. Press press or to highlight an item, then to select it. Adding symbols You can add symbols for sports, food, holidays, animals, and more. 1. Press . 2. Press to scroll through the symbol categories, then press to select a category. 3.
Symbols Prohibition Household Food Sports Activity 9 | Creating labels
Occasion Shipping Electrical Animals Zodiac Emoticons 10 | Creating labels
Measurement Metric Abbreviation Punctuation Parentheses Math 11 | Creating labels
Currency DoubleFigure Greek Office Safety Facility 12 | Creating labels
Adding frames Frames include borders and fun symbols for activities and special occasions. ABC 1. Press ABC to display Frame, then press ABC to select it. 2. Press to scroll through the options, then press the frame you want to use.
37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 14 | Creating labels
Changing the font size Changing the font You can change the size for the letters, numbers, and symbols on your label. Go from simple to ornate, and create the right impression for each label. 1. Press 1. Press . 2. Press to select a 1-line or 2-line layout, then press . You see squares representing the font, and an indication of the size and number of lines. 3. Press to scroll through the 4 available sizes, then press to select the one you want to use.
Changing the font style Saving labels Personalize your labels with italic, shadow, and outline effects. You can store up to 30 saved labels at a time. 1. Press 2. Press press . to scroll through the styles, then to select the one you want. Note: Styles applied to small or elaborate characters may not print clearly. You can choose from the following font styles: After you finish creating your first label, press + to create another label (the label number appears to the left of the text).
Printing labels Printing multiple copies 1. Press to print the current label. The length of the label and the number of copies shows on the display while the label prints. 2. When printing stops, press the button. Cut Warning: Do not press the Cut button until the tape stops moving or the tape cartridge may be damaged. ■ To select a saved label for printing, press + or + to scroll through your labels, then press to select the one you want. ■ To preview your label before printing, press .
Customizing your labels You can customize your labels by creating special effects, such as vertical and mirrored text. You can also print sequentially numbered labels or custom lengths. In addition, you can adjust the font width, spacing, and print density. A B C You can specify vertical orientation either before or after you enter the text for a label. 1. Press . 2. Press repeatedly until Vertical appears, then press to select it. 3.
Creating sequentially numbered labels Customizing the length of labels You can create a label, and then print numbered copies of it. 1. Press A-1 A-2 A-3 1. Create your label as described on page 7. 2. Press or to move the cursor where you want to add the number, then press + . 3. Enter the number for the first label, then press . You can create extra-long or short labels. . 2. Press until you see Label length, then press to select it. 3. Press to select a value up to 15 in. (40 cm), then press .
3. Press to change from Narrow to Wide, then press . Adjusting the Display You can adjust the following display settings: Selecting narrow characters You can change from normal characters and symbols to narrow ones. 1. Press 2. Press press . until you see Narrow, then to select it. 3. Press again to select Narrow. Increasing print density You can make your labels darker if necessary. 1. When the power is off, press + . Print density appears on the display. 2. Press . 3.
Applying Iron-On labels Use only label cartridges with this mark: Attaching your labels . You can attach labels to the following types of fabric: ■ 100% cotton ■ 100% linen ■ 100% polyester ■ cotton/polyester blends ■ fabrics with a flat, smooth surface Do not use textured fabrics such as terry cloth, corduroy, or flannel; roughly woven fabrics; fabrics with a rough surface such as denim; waterproof fabrics; or fabrics which require a cool iron.
Label usage tips ■ Labels are made from non-toxic materials; however, attached labels are stiff, and may rub or scratch the skin if direct contact occurs. ■ When attaching a label to fabric that may be frequently washed or dry-cleaned, it is recommended that the label be sewn on. ■ When using a steam iron, turn the steam off when ironing on the label. ■ Labels are dry-cleanable and machine washable. ■ Once a label is attached, it cannot be easily removed.
Cleaning the Printer Use a dry, soft cloth or, for stubborn stains, a moist cloth that has been wrung dry. Remove the tape cartridge and clean the print head using a cotton swab moistened with rubbing alcohol, as shown below: Caution: Never use chemicals or solvents such as benzine, thinner, or alcohol, or use a chemical duster. This could damage your product. Cleaning the print head If the print becomes faint or distorted, the print head may need cleaning.
Solving Problems If you have a problem with your LabelWorks, check the display or the troubleshooting suggestions below. Error messages Insert tape Turn the power off and install a tape cartridge. Check battery The batteries may be running out or installed incorrectly, nonalkaline batteries are being used with alkaline batteries, or old and new batteries are being used together. Turn the power off and replace batteries with new ones, or use the optional AC adapter.
Problems and solutions Check the solutions below if you are having trouble using your product. The product does not function normally The product may stop functioning due to static electricity or other causes. If your product does not function normally (for example, the power doesn’t turn on/off or the display is distorted), reset your product by following the procedure below. Warning: Resetting your product will erase all saved labels and formatting and return your product to default settings. 1.
Nothing prints ■ Make sure text has been entered. Printing stops in the middle of text ■ Install a new tape cartridge. ■ Replace the tape cartridge if necessary. ■ Replace the batteries or use the optional AC adapter (APT0615Z1-1). ■ Check the display for an error message and perform the suggested solution. ■ Replace the batteries with new ones, or use the optional AC adapter (APT0615Z1-1). Saved labels are gone ■ Make sure you have not accidentally deleted the text by pressing + .
Labels fall off after a few washings ■ Try ironing the label on again with a higher temperature setting. ■ Make sure you press the iron down on the entire label. ■ Try holding the iron down for 15 to 20 seconds. ■ If the item needs frequent washing, you might need to sew on the label. Epson Technical Support Visit epson.com/support (U.S.) or epson.ca/ support (Canada) where you can view manuals, get FAQs, or e-mail Epson. To speak with a support specialist, call: U.S.
Purchase supplies and accessories Epson offers a wide array of tapes for multiple uses. For a complete list of available tapes, including additional widths, visit epson.com/LW300Tapes. Specifications Dimensions (approximate) Width: 5.70 inches (145 mm) Depth: 5.90 inches (150 mm) Height: 2.16 inches (55 mm) Weight (approximate) 14 oz (400 g) (excluding batteries and tape cartridge) Operating temperature 50 to 95 ºF (10 to 35 ºC) www.epson.com/LabelWorks (U.S. sales) or www.epson.
Notices Safety instructions Before using your product, read the following safety instructions to make sure you use it safely and effectively. ■ Always use the product as instructed in the manual. Otherwise, damage or injury may occur. ■ Do not subject the product to any strong force or shock such as dropping, hitting, or standing on the product. ■ Do not spill liquid on the product or use the product with wet hands. ■ Do not open any covers on the product other than the rear cover.
■ Operate the keyboard gently. ■ Take care not to cut your fingers when cutting a label with scissors. ■ Do not attach a label on human bodies, living things, public facilities or other people’s belongings. ■ with water and seek medical treatment. If a battery is swallowed, seek medical treatment immediately. ■ Do not touch the soleplate of your iron or the label immediately after it is attached. Doing so may cause a burn.
AC adapter ■ ■ Use only model APT0615Z1-1 AC adapter and power cord with your product. Do not use the AC adapter with any other equipment and use only with the specified voltage. Using the wrong AC adapter and power cord may result in damage, overheating, fire, or electric shock. ■ Do not place the AC adapter or power cord near a heater. ■ To avoid fire or electric shock, do not use a damaged AC adapter or power cord. ■ Turn off the product before unplugging the AC adapter.
About printed labels Attached labels and adhesive are affected by the type of surface and by environmental conditions such as humidity and heat. Labels may peel off, curl, or fade; printed characters may fade; color may be left behind after removing the label; adhesive may become stuck to the attached surface. Epson is not responsible for any damage or loss caused by labels or adhesive.
Epson America, Inc. Limited Warranty What Is Covered: Epson America, Inc.
What This Warranty Does Not Cover: This warranty covers only normal use in the United States, Canada, or Puerto Rico. Using this product for continuous production or similar high duty purposes is not considered normal use; damage, maintenance or service from such use will not be covered under this warranty. This warranty is not transferable. This warranty does not cover damage to the Epson product caused by parts or supplies not manufactured, distributed or certified by Epson.
exclusions may not apply to you. This warranty gives you specific legal rights and you may have other rights which vary from jurisdiction to jurisdiction. To find the Epson Authorized Reseller nearest you, visit our website at http://www.epson.com. To find the Epson Customer Care Center nearest you, visit http://www.epson.com/support. You can also write to Epson America, Inc., P.O. Box 93012, Long Beach, CA 90809-3012.
36 | Notices
Display Turn on/off Print Cut Preview Add symbols Delete Add a frame or other special effect Shift Select/Enter Caps lock LW300_IronOn_UGcover_CPD38096.
Font size Frame Label number The black marks indicate features you are using LW300_IronOn_UGcover_CPD38096.
