User`s guide

20 | Adjusting the Display
3. Press to change from Narrow to
Wide, then press .
Selecting narrow characters
You can change from normal characters and
symbols to narrow ones.
1. Press .
2. Press until you see Narrow, then
press to select it.
3. Press again to select Narrow.
Increasing print density
You can make your labels darker if necessary.
1. When the power is off, press + .
Print density appears on the display.
2. Press .
3. Press to adjust the print density, then
press to select the density you want.
Note: The default value (0) is recommended.
Adjusting the Display
You can adjust the following display settings:
Contrast: Adjusts the density of the fonts on
the display.
Language: Changes the language of the
settings and messages on the display.
inch:cm: Selects the unit of measurement.
1. Press + .
2. Press to highlight a setting, then
press to select it.
3. Press to highlight the option you
want, then press to select it.