User`s guide

26 | Solving Problems
Nothing prints
■ Make sure text has been entered.
■ Replace the tape cartridge if necessary.
■ Check the display for an error message
and perform the suggested solution.
■ Replace the batteries with new ones,
or use the optional AC adapter
(APT0615Z1-1).
■ Make sure the rear cover is closed.
Characters do not print properly
■ Make sure the tape cartridge is correctly
seated.
■ Clean the print head.
■ Change the font (sometimes symbols do
not print properly when certain fonts are
selected).
Printing stops in the middle of text
■ Install a new tape cartridge.
■ Replace the batteries or use the optional
AC adapter (APT0615Z1-1).
Saved labels are gone
■ Make sure you have not accidentally
deleted the text by pressing
+ .
■ If the product is reset, all of the
previously entered text will be deleted.
■ If the AC adapter is unplugged or the
batteries are removed during operation,
the text may be deleted.
Labels curl after ironing
■ Try raising the iron temperature setting.
■ Make sure you press the iron down on
the entire label.
■ Try trimming the corners of the label and
iron it again.