User`s guide

6 | Getting Started
4. If there is excess tape, feed the end of the
tape through the tape guide slot.
5. Replace the cover and snap it into place.
6. Press to turn on the printer.
7. Press + .
8. Press the Cut button to cut the tape.
Warning: Do not press the Cut button until
the tape stops moving or the tape cartridge
may be damaged.
Removing a tape cartridge
1. Remove the rear cover.
2. Hold the cartridge by the tabs, and lift it
straight up.
Changing the language
If you want to change the language on the
display, follow these steps:
1. Press + .
2. Press to highlight Language, then
press to select it.
3. Press to highlight your language,
then press to select it.