Quick Start and Warranty

Specialty Labels | 21
Below the preview, the display shows the
fourth line of the left block and the first
line of the right block.
3. Use the button to locate and edit
the existing text (left block) or add text to
the 4 lines in the right block.
4. When you are finished editing the label,
press to print.
Barcode labels
LabelWorks can create barcode labels in a
variety of formats. These barcodes can be
used for inventory management and asset
tagging.
The following barcode formats are available:
EAN-8, EAN-13, CODE128, CODE39, QR
CODE, ITF, CODABAR, UPC-A, UPC-E.
1. Press + .
2. Use the button to highlight a
barcode format, then press to select
it.
3. Select the Width, Ratio, and other
settings. The settings differ depending
on the type of barcode.
4. Enter the code using the numbers on the
keyboard.
5. When you’re ready, press to print.
The following barcode settings can be
modified:
Width: Adjusts the space between the bars
of the barcode.
Ratio: Adjusts the width of the wide bars in
the barcode (2, 2.5, or 3 thin bar widths).
Check Digit: Determines whether a check
digit is included in the barcode (for error
correction). If selected, the check digit will
be previewed on the display.