User's Guide

1. Press the key.
2. Select Panel and press the key.
3. Select the length of the segments, or select Auto to have the length vary by the label text.
4. Press the key.
5. Enter the text, pressing the key after each segment.
Parent topic: Creating Special Format Labels Using the Keyboard
Cable Labels
You can create flag and wrapped labels to identify cords and cables. For best results, use special cable
wrap tapes or strong adhesive tapes for labelling cables.
Flag labels provide a large surface for multiple lines of text. A vertical line marks the center of the flag to
help you wrap the cable evenly.
Wrapped labels are useful for tight spaces where flags are too large or only a short identifier is
necessary. Do not use a regularly printed label (lengthwise) as a wrapped label; bending the cord may
cause the label to detach from the cord.
1 Wrap:V (vertical)
2 Wrap:H (horizontal)
3 Flag:V (vertical)
4 Flag:H (horizontal)
Keep this information in mind when creating cable labels:
• Use reflective tape for labels that will be used in dark locations.
• For small cables, use flag labels to increase readability.
41