User's Guide

Solving Problems | 29
■ If you are using the AC adapter, make
sure that it is securely connected to both
the wall outlet and the product.
■ Adjust the contrast as described on
page 25.
The display turns off
■ The power turns off automatically if the
product is idle for more than 5 minutes.
■ If an incorrect button sequence is
entered, the display may flicker or turn
off for an instant.
Nothing prints
■ Make sure text has been entered.
■ Replace the tape cartridge if necessary.
■ Check the display for an error message
and perform the suggested solution.
■ Replace the batteries with new ones,
or use the optional AC adapter
(C52CB73020).
■ Make sure the rear cover is closed.
Characters do not print properly
■ Make sure the tape cartridge is correctly
seated.
■ Clean the print head.
■ Change the font (sometimes symbols do
not print properly when certain fonts are
selected).
Printing stops in the middle of text
■ Install a new tape cartridge.
■ Replace the batteries or use the optional
AC adapter (C52CB73020).
Saved labels are gone
■ Make sure you have not accidentally
deleted the label
.
■ If the product is reset, all of the
previously entered text will be deleted.
safety.book Page 29 Wednesday, May 22, 2013 4:28 PM