User`s manual

WARNING: Never use short tear-off with labels.
Otherwise, labels may come off their backing and jam the
printer.
When you have finished printing, and if the perforation is at the top
of form position, the printer automatically feeds the perforation of
the continuous paper to the tear-off edge of the printer cover. You
can then tear off the page using the tear-off edge as shown below.
If the page perforation is not properly aligned with the tear-off edge,
you can adjust the tear-off position using micro-adjustment, as
described below.
Note: Short tear-off is performed whenever the printer receives a
full page of data or a form feed, and no more data is received for
three seconds.
When you resume printing after tearing off the sheet, the paper
automatically feeds backward to the loading position before
printing begins.
3-18
Using the Printer