User`s manual

The self test continues until the paper runs out or until you press

the

ON LINE

button. To stop the test, press the

ON LINE

button.

Note:

To resume the test, press the

ON LINE

button once more.

To end the self test when paper is loaded, press the

LOAD/EJECT

button to eject the paper. Then turn off the printer.

Loading Envelopes

You can print on plain, bond, or air mail envelopes. The cut sheet

feeder can hold up to 25 plain or bond envelopes, or 30 air mail

envelopes. Before printing on envelopes, you need to set the paper

thickness lever. See Printing on Special Paper in Chapter 2.

WARNING When you print on envelopes, be sure that the

settings of your application program keep the printing

entirely within the printable area.

You load envelopes in much the same way as regular paper.

Make sure that the paper release lever is in the single-sheet

position.

CAUTION:

If you are using the double-bin cut sheet

feeder, be sure to load envelopes into bin 1, never into

bin

2. Make sure that

you select bin 1 using the

LOAD/EJECT

button or with the ESC EM software

command.

5-14

Using the Printer Options