User`s manual

3. Take a stack of envelopes and fan it; then tap the stack on a flat
surface to even the edges. Insert the envelopes into the front bin.
4. Press the LOAD/EJECT button to load an envelope. Then press the
ON LINE button to start printing.
Operating the Cut Sheet Feeder
After stacking paper in the cut sheet feeder, turn on the printer and
make sure that the ON LINE light is on. When the printer is on line, a
new sheet of paper loads automatically whenever a printable
character or line feed command is sent to the printer.
Paper out condition
When the printer is on line and receives print data from the
computer, the first sheet loads automatically. Subsequent sheets
load automatically as necessary.
l In the cut sheet feeder mode, the PAPER OUT light goes off while
a sheet of paper is being fed, but the printer remains on line.
5-16
Using the Printer Options