User`s manual

Graphics
See Chapter 4 for sample graphics programs. See the table under
ESC * for graphics modes.
ESC K
Select Single-density Graphics Mode
Format:
ASCII code: ESC K nl n2
Decimal:
27 75 nl n2
Hexadecimal: 1B 4B nl n2
Comments:
Turns on 8-pin, single-density graphics mode. The total number
of columns = nl + (n2 x 256).
ESC L
Select Double-density Graphics Mode
Format:
ASCII code: ESC L nl n2
Decimal:
27 76 nl n2
Hexadecimal: 1B 4C nl n2
Comments:
Turns on 8-pin, low-speed, double-density graphics mode. The
total number of columns = nl + (n2 x 256).
ESC Y
Select High-speed Double-density Graphics Mode
Format:
ASCII code:
ESC Y nl n2
Decimal:
27 89 nl n2
Hexadecimal: 1B 59 nl n2
Comments:
Turns on 8-pin, high-speed, double-density graphics mode. The
total number of columns = nl + (n2 x 256).
9-38
Command Summary