User`s manual

Using Short Tear-off
When you are finished printing, the short tear-off feature
automatically feeds the perforation of the continuous paper to the
tear-off edge of the printer cover so that you can tear off the last
sheet. When you resume printing, the paper feeds backward to the
loading position. This feature lets you save the paper normally lost
between documents.
Note: You can use the tear-off feature only with the built-in
tractor feeding system.
To use this feature, set DIP switch 2-7 to on. Then load continuous
paper in the normal way. Leave the paper guide cover open so that
you can use the cover’s tear-off edge.
You can leave the short tear-off feature turned on (DIP switch 2-7
on) even when you are using single sheets. When you move the
paper release lever to the single-sheet position, the short tear-off
feature is disabled.
Using the Printer 3-17