Operation Manual

6
LW-K400 User’s Guide
J Adding a frame
1. Press .
2. Select an item with
, and press .
Entering the frame No. to select does the same.
Available frames sSymbol List
J Specifying the length of labels
1. Press .
2. Highlight "Label length" using the cursor keys, then press
.
3. Select a value (up to 40 cm) using the cursor keys or enter the
value using the numeric keys, then press
.
4. Select a text alignment setting using the cursor keys, then press
.
5. Press
to conrm the font size setting.
6. Select "Auto" using the cursor keys, then press
.
7. Enter text.
If the length of entered text exceeds the label length you specied,
the font becomes small so that the entire text ts in the specied
length.
J Changing the margins of labels
1. Press .
2. Highlight "Margins" using the cursor keys, then press
.
3. Select one of the options using the cursor keys, then press
.
4. Press
.
If you select the "None" option, a cut mark is printed. Cut the tape
along the cut mark.
J Adjusting the space between characters
1. Press .
2. Select "Char. spacing" with
, and press .
3. Select an item with
, and press .
J Making the width of font narrower
1. Press .
2. Select "Narrow" with
, and press .
3. Select "Narrow" with
, and press .
J Lining up characters vertically
1. Press .
2. Select "Vertical" with
, and press .
3. Select "On" with
, and press .
J Using mirror writing for the label
1. Press .
2. Select "Mirror print" with
, and press .
3. Select "On" with
, and press .
Creating a label with a special form
c
To create labels with a special form, a message conrming that
the text will be deleted may appear when is pressed. Press
to delete the current text and to show the special form.
MEMO
To exit the following special form mode, press
, then select the
"Exit" and press .
J Creating an folder tab label
1. Press .
2. Select from "Tab:Medium", "Tab:Small" or "Tab:Large" with
,
and press .
3. Select a value with
or enter label length, and press .
Maximum length: 12.5cm (5.0 inch)
4. Enter text.
J Creating a label for cables
Flag labels wrapping a cable
1. Press .
2. Select from "Flag:Hori.", "Flag:Vert." or "Flag:Edge" with
,
and press .
3. Select a value with
or enter label length, and press .
Maximum length: 12.5cm (5.0 inch)
4. Enter text.
Labels wrapping a cable
1. Press .
2. Select "Wrap" with
, and press .
3. Select a value with
or enter label length, and press .
Maximum length: 12.5cm (5.0 inch)
4. Enter text.