Parts User Manual

Figure 1-2. Control panel
You have already used the control panel for a special purpose,
printing the test patterns. Here are the main functions of the lights and
buttons on this panel:
l The POWER light glows green when the power is on.
l The READY light glows green when the printer is ready to accept
data. Don’t worry if this light flickers somewhat during printing;
this flickering is normal.
l The PAPER OUT light glows red when the printer is out of paper or
the paper is loaded incorrectly.
l The ON LINE light glows green when the printer can receive data.
In addition to the lights, the control panel has three buttons.
l ON LINE-switches the printer between on-line and off-line status.
When the printer is on-line, the ON LINE light glows and the
printer is ready to accept data.
The other two buttons, FF and LF, work only when the printer is
off-line (when the ON LINE light is off). If the ON LINE light is on,
press the ON LINE button before you use these.
5