Parts User Manual

13 0D
14 0E
15 OF
18 12
20 14
24 18
ESC 25 19
27 1B
ESC 33 21
ESC 37 25
CR
SO
SI
DC2
DC4
CAN
EM
ESC
%
Carriage return. Prints the contents of the
buffer and resets the buffer character count to
0.
Shift out. Turns expanded mode ON for the
length of the line. Can be cancelled by ASCII 20
or ESC “W0”. Works with pica, elite, or com-
pressed mode.
Shift in. Empties the buffer and turns com-
pressed mode (17.16 cpi) ON. Cannot work
with emphasized or pica mode. Can also be set
with DIP switch l-l.
Device control 2. Turns compressed mode
OFF
Device control 4. Turns the expanded mode set
by ASCII 14 OFF
Cancels all text but not control codes in the
print buffer.
Sets the optional cut-sheet feeder. Format:
ESC 25 n
where n toggles the cut-sheet feeder on and
off: 0 turns it OFF and 4 turns it ON. You cannot
use “EM” in place of 25 for this command. Can
also be turned ON and OFF with DIP switch
1-3.
ESCape. Prepares the printer to receive con-
trol codes.
Master Select. Selects 1 of 48 unique print
mode combinations. Format:
ESC “!" n
where n stands for a number between 0 and
255. See Chapter 5 for details.
Activates user-defined character set.
ESC "%" 0 0
selects the ROM set, and
ESC "%" 1 0
selects the RAM set defined by ESC "&"
B-2