Parts User Manual

ESC 53
35 5
ESC 54
36 6
ESC 55
37 7
ESC 56
38 8
ESC 57
39 9
ESC 60 3C <
ESC 58
3A :
ESC 63 3F ?
ESC 64 40 @
ESC 65 41 A
ESCape “5” 1 causes the LX-90 to perform an
automatic line feed with each carriage return.
ESCape “5” 0 cancels ESCape “5” 1.
Selects standard character set if alternate
character set has been previously selected.
See Appendix A for character set tables.
Selects alternate character set. See Appendix
A for character set tables.
Disables the paper-out sensor. Can also be dis-
abled with DIP switch 1-5.
Enables the paper-out sensor. Can also be
enabled with DIP switch 1-5.
Turns one-line unidirectional mode ON. Prints
each line from left to right.
Copies the ROM character set to RAM. For-
mat:
ESC “:” n1 n2 n3
where n1, n2, and n3 are all 0. They are
included for future expansion. The RAM char-
acter set must be activated with ESC “%".
Redefines one of the four alternate graphics
codes-“K”,“L”,“Y”, or “Z’‘-as one of the
seven graphics density numbers used with the
ESCape “*” command. Format:
ESC “?s” n
where s is K,L,Y, or Z and n is 0 - 6.
Reset Code, which resets the printer to its
power-up state, including resetting top of page.
Clears all text and control codes from the print
buffer.
Sets line spacing to n/72 inch (n-dot). Format:
ESC “A” n
where n = O-255.
B-4