Unit installation

Now you have set the HomeWriter- to print in compressed

mode. Merely push ON LINE to put your printer back on-line and

print your sample once more. It should appear in compressed mode

just as ours does below:

THE LETTERS IN THIS EXAMPLE

ARE MADE UP OF TINY DOTS.

Turn off your printer to cancel the compressed setting, and-if you

wish-try this exercise with other modes.

Mode combination

Two of the SelecType modes (NLQ and emphasized) can be com-

bined to create a striking effect. If you want to see how this combina-

tion looks, follow the instructions below:

1) See that the ON LINE and READY lights are on.

2) Press ON LINE and FF at the same time.

3) Press ON LINE once and then FF once.

Since one is the code for NLQ, you have now set the HomeWriter-

for that mode.

4) Press ON LINE one more time and then FF once again.

This makes a total of two times, and thus sets the HomeWriter- for

emphasized also.

5) Press LF to return the panel to its standard operation.

6) Press ON LINE to put the HomeWriter- on-line.

Now print your sample document or run your sample program. If

your printing appears in

emphasized Near Letter Quality

as you see here, you have successfully combined the two modes. If

you get any other results, turn your printer off and back on and then

try the steps again.