MF1466-01 CMOS 8-BIT SINGLE CHIP MICROCOMPUTER S5U1C8F360Z1 Manual (Adapter Board for S1C8F360/8F361)
NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice.
New configuration of product number Starting April 1, 2001, the configuration of product number descriptions will be changed as listed below. To order from April 1, 2001 please use these product numbers. For further information, please contact Epson sales representative.
CONTENTS S5U1C8F360Z1 Manual (Adapter Board for S1C8F360/8F361) This manual describes how to use the Adapter Board (S5U1C8F360Z1) that is a PROM writing and evaluation tool for the 8-bit Single Chip Microcomputer S1C8F360/8F361. Contents CHAPTER 1 INTRODUCTION ____________________________________________ 1 1.1 1.2 CHAPTER Outline of S1C8F360 Adapter Board (S5U1C8F360Z1) ............................. 1 Components of S1C8F360 Adapter Board (S5U1C8F360Z1) .....................
CHAPTER 1: INTRODUCTION CHAPTER 1 INTRODUCTION 1.1 Outline of S1C8F360 Adapter Board (S5U1C8F360Z1) The S5U1C8F360Z1 board (hereafter Adapter Board) is a PROM writing tool for the 8-bit Single Chip Microcomputers S1C8F360 and S1C8F361. The Adapter Board connected to the On Board Programming Writer (S5U1C88000W3) allows writing user data to the Flash EEPROM built into the S1C8F360/8F361 (package model) placed on its IC socket using the On Board Programming Writer Control Software (S5U1C8F360Y3).
CHAPTER 2: PRECAUTIONS CHAPTER 2 PRECAUTIONS The connectors CN1, CN2 and CN3 have the same pin layout as the Peripheral Circuit Board for S1C88816/8F360 (S5U1C88816P). This allows connection between the user target system for the S5U1C88816P and the Adapter Board. Take the following precautions when using the S1C8F360 Adapter Board (S5U1C8F360Z1): 2.1 Precautions for Operation (1) Turn the power of all equipment off before connecting or disconnecting cables.
CHAPTER 2: PRECAUTIONS • Do not turn the OSC3 oscillation circuit on in the low power mode. Do not switch over the operating mode (normal mode ↔ high speed mode) when the OSC3 oscillation circuit is on, as this will cause a malfunction. The actual IC on the Adapter Board can change over the internal power voltage (set by VDC2, VDC1 and VDC0), but the S5U1C88816P cannot change the actual power voltage, because only the VDC2, VDC1 and VDC0 values are changed.
CHAPTER 3: CONFIGURATION FOR THE S1C8F361 CHAPTER 3 CONFIGURATION FOR THE S1C8F361 The S1C8F360 Adapter Board (S5U1C8F360Z1) supports the S1C8F361 as well as the S1C8F360. In this case, the pins listed in the table below change their functions. Table 3.1 Pin function for S1C8F361 Print AVDD AVSS S1C8F360 AVDD AVSS S1C8F361 CF CG AVSS AVDD When using the S1C8F361, open the AVDD and AVSS jumpers and mount the booster capacitor for the CF and CG at C1. C1 CF CG Fig. 3.
CHAPTER 4: NAME AND FUNCTION OF EACH PART CHAPTER 4 NAME AND FUNCTION OF EACH PART This chapter describes the name and function of each part of the S1C8F360 Adapter Board (S5U1C8F360Z1). (5) (4) (3) (1) (2) (6) (2) (2) (7) Fig. 4.1 Top view of the S5U1C8F360Z1 board (1) IC socket Insert an actual IC. Align Pin 1 with the bottom left corner of the socket (in top view) and insert IC. (2) Connectors for target system (CN1, CN2, CN3) These connectors are used to connect the I/O and LCD.
CHAPTER 5: SERIAL PROGRAMMING CHAPTER 5 SERIAL PROGRAMMING The S1C8F360 Adapter Board (S5U1C8F360Z1) connected to the On Board Programming Writer (S5U1C88000W3) allows writing user data to the Flash EEPROM built into the S1C8F360/8F361 (package model) placed on its IC socket using the On Board Programming Writer Control Software (S5U1C8F360Y3). Refer to "Appendix PROM programming" in the "S1C8F360 Technical Manual" for the programming procedure. 5.
CHAPTER 6: CONNECTING WITH THE TARGET SYSTEM CHAPTER 6 CONNECTING WITH THE TARGET SYSTEM The Adapter Board (S5U1C8F360Z1) can be used as an evaluation board by connecting it with the user target board. (1) To operate the microcomputer on the Adapter Board, the user must provide the peripheral circuits. Refer to "Basic External Wiring Diagram" in the "S1C8F360 Technical Manual" for the required circuits.
CHAPTER 6: CONNECTING WITH THE TARGET SYSTEM Table 6.1 Pin assignment of the I/O connectors CN1 40-pin CN1-1 40-pin CN1-2 No. Pin name No.
41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 R12 R13 R14 R15 R16 R17 R20 R21 R22 R23 R24 R25 R26 R27 R30 R31 R32 R33 R34 R35 R36 R37 R50 R51 COM0 COM1 COM2 COM3 COM4 COM5 COM6 COM7 COM8 COM9 COM10 COM11 COM12 COM13 COM14 COM15 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 2-1 2-2 2-3 2-4 2-5 2-6 2-7 2-8 2-9 2-10 2-11 2-12 2-13 2-14 2-15 2-16 2-17 2-18 2-19 2-20 2-21
CHAPTER 8: PRODUCT SPECIFICATIONS CHAPTER 8 PRODUCT SPECIFICATIONS The component specifications of the S1C8F360 Adapter Board (S5U1C8F360Z1) are listed below. S5U1C8F360Z1 Dimensions: 183 mm (L) × 154 mm (W) × 48 mm (H) Power supply: Within the operating voltage range of the microcomputer I/O cable (80-pin/40-pin × 2, 2 sets) S5U1C8F360Z1 connector: KEL 8830-80-170L or equivalent Cable connector (80-pin): KEL 8822E-080-171 Cable connector (40-pin): 3M 7940-6500SC Cable: 40-pin flat cable Length: Approx.
International Sales Operations AMERICA ASIA EPSON ELECTRONICS AMERICA, INC. EPSON (CHINA) CO., LTD. - HEADQUARTERS - 23F, Beijing Silver Tower 2# North RD DongSanHuan ChaoYang District, Beijing, CHINA Phone: 64106655 Fax: 64107319 150 River Oaks Parkway San Jose, CA 95134, U.S.A. Phone: +1-408-922-0200 Fax: +1-408-922-0238 SHANGHAI BRANCH 4F, Bldg., 27, No. 69, Gui Jing Road Caohejing, Shanghai, CHINA Phone: 21-6485-5552 Fax: 21-6485-0775 - SALES OFFICES West 1960 E.
In pursuit of “Saving” Technology, Epson electronic devices. Our lineup of semiconductors, liquid crystal displays and quartz devices assists in creating the products of our customers’ dreams. Epson IS energy savings.
S5U1C8F360Z1 Manual (Adapter Board for S1C8F360/8F361) ELECTRONIC DEVICES MARKETING DIVISION EPSON Electronic Devices Website http://www.epson.co.