Product specifications

12 – 69
total cell
Additional blank dot colums.
Pre-defined 3 blank dot colums 
(e) Out of range:
The command will be ignored.
(f) Details:
• If the double width print feature is specified while this command is active, the
number of additional blank dot columns will be doubled.
Example: Normal Width (9 + 3) + 5 = 17 columns.
Double Width (9 + 3 + 5) × 2 = 34 columns.
• This command is not effective in the following print modes:
— Bit Image Graphics.
— HSD
Note: Refer to the illustration attachments for further details.
• The normal character cell matrix has 3 blank dot columns that are pre-defined and
cannot be changed by the user. The additional blank dot columns defined by this
command are added to this normal cell.
Example:
Normal Cell Additional Blank Columns Total Cell
1. n = 0 (9 + 3) + 0 = 12
2. n = 5 (9 + 3) + 5 = 17
• This command remains in effect until one of the following commands are received.
— Next ESC.N.n command.
— CAN
— ESC CAN
— I-Prime
• This command is effective in both the Utility Mode and NLQ mode. Any value of
“n” will produce the same physical amount of trailing white space after the characters
for both NLQ and UTL.
• Pre-defined (default) inter-char clearance is as follows:
3/120 inch for 10 CPI