Product specifications

12 – 71
• The command to set clearance between characters is executed immediately upon
recognition by the printer.
• This command is not effective for Graphics modes.
32) Inter-character clearance—define amount—by dot column
(a) Code: ESC V n
(b) Compatibility: IBM III
(c) Function:
Defines the number of blank dot columns to add to the right side of each character.
(d) Range:
• 0 n 11
(e) Out of range:
• If n > 11 is specified, n will be truncated to 11. Any value of n > 11 will be truncated.
(f) Additional details:
• Once set, the clearance does not change until reset.
• The command to set clearance between characters is executed immediately upon
recognition by the printer.
• The pre-defined character cell matrix has 3 blank dot columns as part of the
character option. Using this command only additional blank dot columns can be
added to the character.
• This command is not effective for Graphics modes.
33) Character cell size—proportional width—ON / OFF
(a) Code: ESC p n
(b) Compatibility: EPS FX
(c) Function:
Turns on/off the proportional character pitch in which each character has a different
cell width in order to unify the “white space” between characters.
(d) Range:
• Range n = 01H, 31H, 81H, or B1H Proportional Spacing = On
• Range n = 00H, 30H, 80H, or B0H Proportional Spacing = Off
(e) Out of range:
• If n does not equal the above values this command is ignored.
(f) Additional details:
• Previous print mode (print quality and pitch) will be maintained.
• Proportional spacing can also be designated by ESC ! n, the Master select command.
Proportional spacing set by ESC ! n can be reset by ESC p 0.
• “See attachments for Proportional width table”.
<
=
<
=