Product specifications

11 – 1
11. OPERATOR CONTROL
11.1 Operator Control Switches and Indicator Lights
Locations of Switches and Indicator Lights
ML3320/3321 OPERATOR PANEL
11.2 Switch Functions
The functions of the switches on the operator panel depend on the state of the printer. Each
function is described in the following table.
MODE
SW
Print Mode Hex Dump Mode
Menu
Mode
Test
Mode
Power On
Mode
Limited
Operation
Mode
Select Deselect Select Deselect
SEL/
MENU
Sets
printer
off line.
Sets
printer
on line.
Sets
printer
off line.
Sets
printer
on line.
Clears
MENU
PAPER
END.
Ends
TEST
mode.
Starts MENU
mode.
Enabled.
SHIFT Enabled.
LF/Micro
Feed
Down
Performs line feed. *1, 2 Selects
next
Group.
Starts Self-test. Enabled.
FF/LOAD/
Micro
Feed Up
• When paper is set:
— If cut-sheet paper is used, the paper
is ejected.
— If fan fold paper is used, the printer
feeds paper up to the next TOF
position.
• When no paper is set while printer
status is "deselect," the printer loads
paper.
Selects
next
Item. *3
Enabled.
The Functions of Switches (1/2) (Without pressing the SHlFT switch) (1/2)
SEL
SEL
MENU
SHIFT
LF
Micro Feed
Down
FF/LOAD
Micro Feed
Up
TEAR PARK QUIET
TOF
EXIT
POWER ALARM
GROUP ITEM SET
MENU
PRINT
PRINT QUALITY
CHARACTER PITCH
HSD UTILITY
NLQ SSD
RESET
10
17
12
20
15
PROP
MODE
SW