Product specifications

11 – 13
Group Item Sets
CSF Bin 1 Line Spacing 6 LPI *
8 LPI
Bottom Margin Valid *
Invalid
Page Width 4) 11) 13.6" *
8"
Page Length 11"
11 2/3" *
12"
14"
16.57"
3.5"
4"
5.5"
6"
7"
8"
8.5"
* Factory default
Notes: 1) Selects both double width and double height characters OR single width and
single height characters.
2) When “I Line” is selected, the receiving buffer size is set to 256 bytes.
3) When “Limited Operation” is selected, after exiting MENU, only the SEL, LF,
FF, and TEAR switches are valid. PRINT QUALITY, PITCH, PARK, and TOF/
Quiet are invalid. This means that MENU mode will not be able to be accessed
via the SHIFT + MENU switch. In order to enter MENU, when the Operator
Panel is set to “Limited Operation”, depress the SHIFT + MENU switch while
powering on the printer. Once in MENU, the Operator Panel can be returned
to “Full Operation” if so desired.
4) When “Page width 8” is selected on the ML321 Turbo, the character printing
wid th per line is set to 8 inches.
5) With Form Tear Off function “on”, if the printer is idle for a few moments
(approx. 0.5, 1, 2 sec.), the paper is forward advanced, from the current print
position, to the tear bar position. If more data is received and processed by
the printer, the paper is then automatically reversed fed back to the original
printing position.
6) Displayed only for roll paper is connection.
7) Displayed only for ML emulation.
8) Displayed only for IBM emulation.
9) Displayed only for CSF (Double Bin) connection.
10) Displayed only for EPSON emulation.
11) Common to Bin, 1 and Bin 2.
12) Displayed only for serial I/F board mounting with F/W for 38400 BPS.