Product specifications

11 – 18
3) Details
(a) After the 1st piece of cut-sheet paper is fed out of the printer (by normal printing
operation) the 2nd piece of cut sheet paper can be inserted by using steps a-e.
(b) The TOF can be adjusted by simultaneously pressing the LF and SHIFT switches
or the FF and SHlFT switches. (paper must be in the tear-off position)
SHIFT + LF = reverse fine LF (1/144 inch)
SHIFT + FF = forward fine LF (1/144 inch)
(Pressing the QUIET and PARK switches or FF and TEAR switches
simultaneously while powering on the printer will reset the TOF to the factory
default position.)
11.5.6 Form Tear-off
1) Overview
Forms Tear-off allows the user to tear off the fan fold paper at any desired position by
automatically advancing the paper to the cutting edge of the front access cover. The printer
performs up and down operations alternately when the TEAR switch is pressed.
2) Operation method
(a) Conditions:
(1) Continuous form paper is loaded, paper release lever set to tractor feed.
(2) Menu is set to Form Tear-off = 500 ms, 1 sec, 2 sec.
(The function is enabled even when the TEAR switch is “OFF. “)
(b) Tear Position:
(1) Use Auto-Loading of continuous form paper.
(2) Adjust to desired Tear-off length using fine LFs. (paper must be in the tear-off
position)
SHIFT + LF = Reverse Fine LF.
SHIFT + FF = Forward Fine LF.
(depress the QUIET + PARK or FF + TEAR switch while powering on the
printer to reset the TOF to the factory default position)
3) Details
(a) Paper will advance to Tear-off position approximately 500 ms, 1 sec, 2 sec after
printing.
(b) When data is received by the printer, or SEL switch is pressed to select the printer,
the paper will retract to the user defined printing position.