Product specifications

12 – 21
5) Line spacing—select fixed amount—7/72 inch
(a) Code: ESC 1
(b) Compatibility: EPS FX/IBM III
(c) Function:
Set the line spacing to 7/72 inch units.
(d) Additional details:
• This command remains in effect until a new line spacing command is sent to the
printer.
• This command does not set the top of form position.
• LF, VT or CR (if Auto LF is on) execute in units of 7/72 inch when this function
is active.
(e) Related functions:
• LF, VT, CR (and Auto LF)
6) Line spacing—define amount—n/72 inch
(a) Code: ESC A n
(b) Compatibility: IBM III
(c) Function:
Stores the line feed amount in 1/72-inch units.
(d) Range:
Range n = 0 – 255
(e) Out of range:
Not applicable—cannot receive value larger than 255 (FFH).
(f) Additional details:
• If n = 0, the line feed amount is 0 and subsequent print-line will overprint over the
same print-line.
• This command does not set the top of form position.
• The ESC 2 command sets the line feed amount stored by this command.
7) Line spacing—define amount—n/72 inch
(a) Code: ESC An
(b) Compatibility: EPS FX
(c) Function:
Sets the line spacing to n/72 inch.
(d) Range:
Range n= 0 to 85, n = 128 to 213 (Bit 7 of the n code is invalid.)
(e) Out of range:
Value of n not within the allowable range will be ignored.
(f) Additional details:
• If n = 0, the line feed amount is 0 and subsequent print-lines will overprint over
the same print-line.
• This command does not set the top of form position.
• Power on default or the I-Prime signal resets the LF unit to the current MENU value.