Product specifications

12 – 22
8) Line spacing—define amount—n/216 inch
(a) Code: ESC 3 n
(b) Compatibility: EPS FX/IBM III
(c) Function:
Sets line spacing to n/216 inch.
(d) Range:
• Range n = 0 – 255 (Epson), n = 1 – 255 (IBM)
(e) Additional details:
• If n = 0, the line feed amount is 0 and subsequent characters will overprint over
the same print-line. (Epson) If n = 0 is specified, this command will be invalid and
the previously set line feed amount remains effective. (IBM)
• This command does not set the top of form position.
• Power on default or the I-Prime signal resets the LF unit to the current MENU value.
• LF, VT, or CR (if Auto LF is on) execute in units of n/72 inch when this function
is active.
(f) Related functions:
• LF, CT, CR (and Auto LF)
9) Line spacing—activate amount defined by n/72 inch
(a) Code: ESC 2
(b) Compatibility: IBM III
(c) Function:
Activate the line feed amount defined by the ESC A “n” command.
(d) Details:
• If no ESC A n sequence has been defined, the line spacing amount will be
according to current MENU value.
(e) Related functions:
• ESC A n
10) Line feed—execute amount—n/216 inch
(a) Code: ESCJ n
(b) Compatibility: EPS FX/IBM III
(c) Function:
Execute a n/216 inch line feed without changing the current stored line spacing value.
(d) Range:
• Range n = 0 – 255 (Epson), n = 1 – 255 (IBM)
(e) Additional details:
• The printer prints the contents of the buffer without a carriage return. (Epson)
Moves the current print position to the print start position of next line (left margin
position) when the “Auto CR” feature is set to “Yes” in MENU mode. (IBM)
• This command does not need a cancel code, since it is executed only once.
• No feed is performed when n = 0. (Epson)
If n = 0 is specified, this command will be invalid. (IBM)