Product specifications

12 – 24
(f) Details:
• If n1 = 0 the line spacing will be set to a distance zero, upon execution of a LF.
• If the line spacing is set to zero (n1 = 0), no paper feeding will occur when a LF
is executed, but any data in the print buffer will be printed (just as if only a CR
was executed).
13) Line feed—execute forward LF with CR
(a) Code: LF
(b) Compatibility: EPS FX/IBM III
(c) Function:
Initiate printing action; print data in the print buffer by causing a print block change
and execute a line feed, then a carriage return. Moves the current print position to
the print start position of next line (left margin position) when the “Auto CR” feature
is set to “Yes” in MENU mode. (IBM)
(d) Additional details:
• Line spacing pitch will be set by ESC A n, ESC 0, ESC 2, ESC 3 n, ESC 1, ESC
% 9 n. Otherwise, the LF pitch will be set by the current MENU when power is
on or I-Prime signal is received.
• This code will cancel enlarged character mode set by the ESC SO (Epson mode
only) and SO code before the LF code or only spaces before this code, only line
feed is performed.
14) Line feed—execute reverse LF
(a) Code: ESC j n
(b) Compatibility: EPS FX
(c) Function:
Execute an immediate n/216 inch reverse line feed; which will be executed only once
each time this command is sent.
(d) Range:
• Range n = 0 – 255
(e) Additional details:
• It is not recommended to use the pull tractor feed unit when reverse line feeds
are required.
• The current line spacing will not be changed.
15) Line feed—execute reverse LF—one line only
(a) Code: ESC ]
(b) Compatibility: IBM III (Hidden command for user)
(c) Function:
Execute the current LF pitch, reverse line feed; which will be executed only once each
time this command is sent.
(d) Additional details:
• It is recommended to use the pull tractor feed unit when reverse line feeds are
required.
• The current line spacing will not be changed.