Product specifications

12 – 28
(d) Range:
• Variable
ASCII Decimal Hexadecimal
n1 0 – 9 48 – 57 30 – 39
n2 0 – 9 48 – 57 30 – 39
Argument
n1 n2 = 00 – 99
(e) Out of range:
The command will be ignored.
(f) Details:
• If n1n2 = 00, the page length will default to the value defined by MENU.
• Maximum form length is based upon current LF spacing. If this spacing is set to
144/144 inch (maximum value for line spacing), the maximum form length will be
99 × 1 inch = 99 inches.
• If line spacing defined, by ESC % 9 n, is zero, this command will effectively be
ignored.
ESC % 9 0 = 0 line spacing.
ESC F n1 n2 where n1 n2 = any value.
Line Spacing Form Length
0 × (any value) = form length.
• This command will set the top of form and the top of VFU.
• Factory setting: 11 inches
25) Form feed—execute
(a) Code: FF
(b) Compatibility: EPS FX/IBM III
(c) Function:
Prints the data in the print buffer followed by a carriage return, then feeds the paper
to the next TOF position.
(d) Additional details:
• Factory setting of form length is eleven (11) inches. (MENU)
• Pressing FORM FEED button on the operator panel feeds the paper forward to
the next top of form position.
• A Form feed will be performed to the next top of form position even when the FF
is received at the top of form position.
• Double width by ESC SO (Epson mode only) and SO will be reset.
• Power up or 1 Prime will set TOF.
26) Form feed—execute
(a) Code: FF
(b) Compatibility: ML