Product specifications
12 – 32
(e) Out of range:
<Epson>
• The n value has to be less than the current form length.
If n is equal to or greater than the form length, this function will be ignored.
• If n = 0 or n = 128, the last skip over perforation value will remain as previous
value.
• If n > 127, bit 7 is cleared and length is set to resulting value of 4.
<IBM>
• The n value can be set regardless of paper length. (IBM)
• Not applicable—cannot receive value larger than 255 (FFH).
(f) Additional details:
• The skip over perforation will be reset by ESC O or page length set command.
• Skip over perforation distance will not be affected by a change in the line pitch.
• Entering to the area of skip over perforation by LF, VT, CR (with LF), ESC J n
and auto line feed will cause the skip over perforation and feed to the top of form.
(g) Related functions:
• Line length value is based on ESC 0, ESC 2, ESC A n, or ESC 3 n, ESC 1, ESC
% 9 n.
A
B
C
C
Page 1
Page 2
TOF
Logical top of form
Logical bottom of form
Skip over perforation area
Description:
Data "C" that encroaches on the
"Skip Over Perf" area is printed
at the next TOF.
Description: