Product specifications

3 – 1
3. GENERAL SPECIFICATIONS
3.1 Power Requirements
1) Input power
Single-phase AC
Voltage: 120 VAC +5.5%, –15%
230/240 VAC +10%, –14%
Frequency: 50/60Hz +2%
2) Power consumption
Local Test: About 70 VA
Idle: About 41 VA
3) AC power cable
Length: Approximately 5.9 ft (1.8 m)
Cable conforms to the UL, CSA, and European Standards.
The AC power cable can be easily disconnected from the printer. The desired printer
operating voltage and the corresponding power cable should be specified when ordering
the printer.
3.2 Electric Insulation
1) Insulation resistance
5 megohms or more when measured between AC input line and frame using 500-VDC
megohmmeter.
2) Dielectric strength
120Vmodel: 1,250 VAC (50 Hz)
230/240V model: 1,500 VAC (50 Hz)
(No damage will result when the above voltage is applied between the AC input line and
frame for 1 minute.)
3.3 Environmental Conditions
1) Ambient temperature and relative humidity
Operating Non-operating Transportation Storage Unit
Temperature
41 to 104 32 to 109.4 –40 to 158 14 to 122 °F
(5 to 40) (–0 to 43) (–40 to 70) (–10 to 50) (°C)
Relative
20 to 80 10 to 90 5 to 95 5 to 95 % RH
Humidity
Avoid condensation at all times.