Quick Start Manual

412667200 Rev.0
Front
Copyright©2014 Seiko Epson Corporation. All rights reserved.
Printed in Philippines XX.XX.-XX(XXX)
2014.3
Earphone microphones
AC adapter USB cable
Ear hooks
Carrying case
Charging
A
Connect the headset and the controller.
B
Connect the controller and the AC adapter.
C
Plug in the AC adapter.
* Initial charging takes approximately 5 hours.
Turning On
Turn on the controller.
Wearing the Headset
A
Place the headset on your head.
B
Make sure the lenses are at eye level.
C
Connect the earphone microphones.
Viewing Movies
1. Charging
2. Wearing the Headset
3. Turning On
Viewing Movies Copied from a
Computer
Viewing Movies on a Website
Before getting started, read the "Safety Instructions" in the User's Guide supplied with this
product. The User's Guide provides detailed information on operating and viewing movies
with the product. You can also download the Reference Guide (PDF or Help application)
from the following website: http://www.epson.com.
1
2
3
Start Guide
Insert until you hear a click.
Connect the USB cable.
Flashing light-blue: Charging starts.
Solid light-blue: Charging complete.
Connect to the earphone microphone
socket.
Adjust the width and
position of the nose pads.
Turning off the screen while the product is on (Sleep
mode)
Slide the power switch briey to the [ ] side to enter Sleep
mode. Slide the power switch to the [
] side again to release
Sleep mode.
Turning o
Slide and hold the power switch to the [ ] side for
at least one second. When the [Power o] screen is
displayed, move [
] to [OK], and then tap.
Open the arms using
both hands.
Headset
with normal shade
Controller
Dark shade
Lens holder
Package Contents
The Home screen is displayed in
the headset's screen.
Trackpad
When you touch the trackpad
with your nger, a pointer
［ ］
is displayed on the screen.
Tap
Touch lightly
Drag
Hold down and move
To launch applications
and select items.
To move icons and scroll
screens.
Slide and hold the power switch until
the LED indicator turns light-blue.
The power is on after the LED
ashes light-blue.
Replacing the Shade
A
Pull forward.
B
Pull down.
C
Align the protruding section
with the socket.
D
Push into the headset.
Push the protruding section on the shade
into the socket on the headset.
If you wear glasses
You can wear the headset over your glasses, or you can use the lens holder supplied with
the product.
If the headset is too loose
Attach the supplied ear hooks if the headset does not feel secure. See the User's Guide for
more details.
AC adapter clip
depend on country