Owner`s manual

102136-0003R-01

April 2013

Spill-Proof Thermal Printer

Owner

’

s Manual

1.5 Changing Paper

Caution: Do not operate the printer if it runs out of paper. The printer will not operate

without paper, but it may continue to accept data from the host computer. Because the

printer cannot print any transactions, the data may be lost.

1. Open the top cover by pulling under the tab on both sides.

2. Remove the used roll.

3. Tear off the end of the new roll so that the edge is loose and place the new roll into

the paper bucket with a few inches of loose paper at the bottom of the roll.

Figure 6: Loading Paper

Caution: Be sure the paper unrolls from the bottom. Otherwise, the printer will not

print or the paper will jam.

4. Pull up on the bottom of the paper roll and align the paper properly before closing the

cover.

5. Advance the paper by pressing on the paper feed button and tear off the excess

paper.

Note: In the event of a paper jam, remove the roll, tear a new clean edge, and replace it

in the paper bucket, as described above. Be sure that the paper unrolls from the bottom

of the roll.