Owner`s manual

102136-0003R-01
April 2013
10
Spill-Proof Thermal Printer
Owner
’
s Manual
2. Media and Supplies Guide
2.1 Thermal Paper Specifications
 Paper Low stripe: “Red; on thermal side”
 Winding Direction: “Thermal Side Out”
 End of Roll: “Not attached to core”
 Core Inside Diameter: 0.5” (12.7mm)
 Maximum Roll Diameter: 3” (76.2mm)
 Paper Conversion: “Roll”
 Top of form mark: “Not required”
 Core Material: “Plastic”
 Core Fabrication: “Solid Wall”
2.2 Ordering Thermal Paper
Recommended thermal paper can be ordered direct from Nanoptix. Please specify the
Nanoptix part number when ordering paper.
Nanoptix p/n Paper Grade Manufacturer Paper Width Thickness
100505-2010
P350 Kanzaki 80mm 61um (2.4mil)
100505-2016
P350 Kanzaki 82.5mm 61um (2.4mil)
Table 5: Thermal Paper Part Numbers
Manufacturer Numbers
Kanzaki Specialty Papers
(USA)
1350 Main Street • Springfield, MA 01103
1.888.KANZAKI
Tel: [phone]
Fax: [phone]
Table 6: Ordering Thermal Paper
Additional grades can be qualified and made available. Contact your sales
representative for more information from our toll free line at 1-888-983-3030.